You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
393 lines
14 KiB
393 lines
14 KiB
/* |
|
|
|
u8x8_d_uc1608.c |
|
|
|
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/) |
|
|
|
Copyright (c) 2016, olikraus@gmail.com |
|
All rights reserved. |
|
|
|
Redistribution and use in source and binary forms, with or without modification, |
|
are permitted provided that the following conditions are met: |
|
|
|
* Redistributions of source code must retain the above copyright notice, this list |
|
of conditions and the following disclaimer. |
|
|
|
* Redistributions in binary form must reproduce the above copyright notice, this |
|
list of conditions and the following disclaimer in the documentation and/or other |
|
materials provided with the distribution. |
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND |
|
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, |
|
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
|
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR |
|
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
|
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
|
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
|
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF |
|
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|
|
|
|
|
|
|
*/ |
|
#include "u8x8.h" |
|
|
|
|
|
|
|
|
|
|
|
static const uint8_t u8x8_d_uc1608_powersave0_seq[] = { |
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_C(0x0af), /* display on */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
U8X8_END() /* end of sequence */ |
|
}; |
|
|
|
static const uint8_t u8x8_d_uc1608_powersave1_seq[] = { |
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_C(0x0ae), /* display off, enter sleep mode */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
U8X8_END() /* end of sequence */ |
|
}; |
|
|
|
static const uint8_t u8x8_d_uc1608_flip0_seq[] = { |
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_C(0x0c8), /* LCD Mapping */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
U8X8_END() /* end of sequence */ |
|
}; |
|
|
|
static const uint8_t u8x8_d_uc1608_flip1_seq[] = { |
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_C(0x0c4), /* LCD Mapping */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
U8X8_END() /* end of sequence */ |
|
}; |
|
|
|
|
|
uint8_t u8x8_d_uc1608_common(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) |
|
{ |
|
uint8_t x, y, c; |
|
uint8_t *ptr; |
|
switch(msg) |
|
{ |
|
case U8X8_MSG_DISPLAY_DRAW_TILE: |
|
u8x8_cad_StartTransfer(u8x8); |
|
|
|
x = ((u8x8_tile_t *)arg_ptr)->x_pos; |
|
x *= 8; |
|
|
|
u8x8_cad_SendCmd(u8x8, 0x000 | ((x&15))); |
|
u8x8_cad_SendCmd(u8x8, 0x010 | (x>>4) ); |
|
|
|
y = ((u8x8_tile_t *)arg_ptr)->y_pos; |
|
y += u8x8->x_offset; |
|
u8x8_cad_SendCmd(u8x8, 0x0b0 | (y&15)); |
|
|
|
c = ((u8x8_tile_t *)arg_ptr)->cnt; |
|
c *= 8; |
|
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr; |
|
do |
|
{ |
|
u8x8_cad_SendData(u8x8, c, ptr); /* note: SendData can not handle more than 255 bytes */ |
|
arg_int--; |
|
} while( arg_int > 0 ); |
|
|
|
u8x8_cad_EndTransfer(u8x8); |
|
break; |
|
/* handled in the calling procedure |
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY: |
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_uc1608_128x64_display_info); |
|
break; |
|
case U8X8_MSG_DISPLAY_INIT: |
|
u8x8_d_helper_display_init(u8x8); |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1701_dogs102_init_seq); |
|
break; |
|
*/ |
|
case U8X8_MSG_DISPLAY_SET_POWER_SAVE: |
|
if ( arg_int == 0 ) |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1608_powersave0_seq); |
|
else |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1608_powersave1_seq); |
|
break; |
|
case U8X8_MSG_DISPLAY_SET_FLIP_MODE: |
|
if ( arg_int == 0 ) |
|
{ |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1608_flip0_seq); |
|
u8x8->x_offset = u8x8->display_info->default_x_offset; |
|
} |
|
else |
|
{ |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1608_flip1_seq); |
|
u8x8->x_offset = u8x8->display_info->flipmode_x_offset; |
|
} |
|
break; |
|
#ifdef U8X8_WITH_SET_CONTRAST |
|
case U8X8_MSG_DISPLAY_SET_CONTRAST: |
|
u8x8_cad_StartTransfer(u8x8); |
|
u8x8_cad_SendCmd(u8x8, 0x081 ); |
|
u8x8_cad_SendArg(u8x8, arg_int ); /* uc1608 has range from 0 to 255 */ |
|
u8x8_cad_EndTransfer(u8x8); |
|
break; |
|
#endif |
|
default: |
|
return 0; |
|
} |
|
return 1; |
|
} |
|
|
|
/*================================================*/ |
|
/* ERC24064-1 */ |
|
|
|
/* |
|
The UC1608 has only one high active chip select input. |
|
UC1604, UC1610 and UC1611 have two chip select inputs. |
|
*/ |
|
|
|
static const u8x8_display_info_t u8x8_uc1608_240x64_display_info = |
|
{ |
|
/* chip_enable_level = */ 1, /* uc1608 has high active CS */ |
|
/* chip_disable_level = */ 0, |
|
|
|
/* post_chip_enable_wait_ns = */ 10, /* uc1608 datasheet, page 39, actually 0 */ |
|
/* pre_chip_disable_wait_ns = */ 20, /* uc1608 datasheet, page 39 */ |
|
/* reset_pulse_width_ms = */ 1, /* uc1608 datasheet, page 42 */ |
|
/* post_reset_wait_ms = */ 10, |
|
/* sda_setup_time_ns = */ 30, /* uc1608 datasheet, page 41 */ |
|
/* sck_pulse_width_ns = */ 65, /* half of cycle time */ |
|
/* sck_clock_hz = */ 8000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */ |
|
/* spi_mode = */ 0, /* active high, rising edge */ |
|
/* i2c_bus_clock_100kHz = */ 4, |
|
/* data_setup_time_ns = */ 30, /* uc1608 datasheet, page 39 */ |
|
/* write_pulse_width_ns = */ 35, /* uc1608 datasheet, page 39 */ |
|
/* tile_width = */ 30, /* width of 30*8=240 pixel */ |
|
/* tile_hight = */ 8, |
|
/* default_x_offset = */ 0, /* reused as y page offset */ |
|
/* flipmode_x_offset = */ 4, /* reused as y page offset */ |
|
/* pixel_width = */ 240, |
|
/* pixel_height = */ 64 |
|
}; |
|
|
|
static const uint8_t u8x8_d_uc1608_erc24064_init_seq[] = { |
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
|
|
U8X8_C(0x0e2), /* soft reset */ |
|
U8X8_DLY(200), |
|
|
|
U8X8_C(0x023), /* Bit 0/1: Temp compenstation, Bit 2: Multiplex Rate 0=96, 1=128 */ |
|
//U8X8_C(0x027), /* Bit 0/1: Temp compenstation, Bit 2: Multiplex Rate 0=96, 1=128 */ |
|
|
|
U8X8_C(0x0c8), /* Map control, Bit 3: MY=1, Bit 2: MX=0, Bit 0: MSF =0 */ |
|
U8X8_C(0x0e8), /* LCD bias Bits 0/1: 00=10.7 01=10.3, 10=12.0, 11=12.7 */ |
|
|
|
U8X8_C(0x02f), /* power on, Bit 2 PC2=1 (internal charge pump), Bits 0/1: cap of panel */ |
|
U8X8_DLY(50), |
|
|
|
U8X8_C(0x040), /* set display start line to 0 */ |
|
U8X8_C(0x090), /* no fixed lines */ |
|
U8X8_C(0x089), /* RAM access control */ |
|
|
|
U8X8_CA(0x081, 0x014), /* set contrast, ERC24064-1 default: 0x040 */ |
|
|
|
U8X8_C(0x000), /* column low nibble */ |
|
U8X8_C(0x010), /* column high nibble */ |
|
U8X8_C(0x0b0), /* page adr */ |
|
|
|
|
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
U8X8_END() /* end of sequence */ |
|
}; |
|
|
|
uint8_t u8x8_d_uc1608_erc24064(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) |
|
{ |
|
/* call common procedure first and handle messages there */ |
|
if ( u8x8_d_uc1608_common(u8x8, msg, arg_int, arg_ptr) == 0 ) |
|
{ |
|
/* msg not handled, then try here */ |
|
switch(msg) |
|
{ |
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY: |
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_uc1608_240x64_display_info); |
|
break; |
|
case U8X8_MSG_DISPLAY_INIT: |
|
u8x8_d_helper_display_init(u8x8); |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1608_erc24064_init_seq); |
|
break; |
|
default: |
|
return 0; /* msg unknown */ |
|
} |
|
} |
|
return 1; |
|
} |
|
|
|
|
|
/*================================================*/ |
|
/* experimental implementation for the uc1608 240x128, not referenced in codebuild */ |
|
|
|
static const u8x8_display_info_t u8x8_uc1608_240x128_display_info = |
|
{ |
|
/* chip_enable_level = */ 1, /* uc1608 has high active CS */ |
|
/* chip_disable_level = */ 0, |
|
|
|
/* post_chip_enable_wait_ns = */ 10, /* uc1608 datasheet, page 39, actually 0 */ |
|
/* pre_chip_disable_wait_ns = */ 20, /* uc1608 datasheet, page 39 */ |
|
/* reset_pulse_width_ms = */ 1, /* uc1608 datasheet, page 42 */ |
|
/* post_reset_wait_ms = */ 10, |
|
/* sda_setup_time_ns = */ 30, /* uc1608 datasheet, page 41 */ |
|
/* sck_pulse_width_ns = */ 65, /* half of cycle time */ |
|
/* sck_clock_hz = */ 8000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */ |
|
/* spi_mode = */ 0, /* active high, rising edge */ |
|
/* i2c_bus_clock_100kHz = */ 4, |
|
/* data_setup_time_ns = */ 30, /* uc1608 datasheet, page 39 */ |
|
/* write_pulse_width_ns = */ 35, /* uc1608 datasheet, page 39 */ |
|
/* tile_width = */ 30, /* width of 30*8=240 pixel */ |
|
/* tile_hight = */ 16, |
|
/* default_x_offset = */ 0, /* reused as y page offset */ |
|
/* flipmode_x_offset = */ 0, /* reused as y page offset */ |
|
/* pixel_width = */ 240, |
|
/* pixel_height = */ 128 |
|
}; |
|
|
|
static const uint8_t u8x8_d_uc1608_240x128_init_seq[] = { |
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
|
|
U8X8_C(0x0e2), /* soft reset */ |
|
U8X8_DLY(200), |
|
|
|
//U8X8_C(0x023), /* Bit 0/1: Temp compenstation, Bit 2: Multiplex Rate 0=96, 1=128 */ |
|
U8X8_C(0x026), /* Bit 0/1: Temp compenstation, Bit 2: Multiplex Rate 0=96, 1=128 */ |
|
|
|
U8X8_C(0x0c8), /* Map control, Bit 3: MY=1, Bit 2: MX=0, Bit 0: MSF =0 */ |
|
U8X8_C(0x0ea), /* LCD bias Bits 0/1: 00=10.7 01=10.3, 10=12.0, 11=12.7 */ |
|
/* maybe 0x0eb??? */ |
|
|
|
U8X8_C(0x02f), /* power on, Bit 2 PC2=1 (internal charge pump), Bits 0/1: cap of panel */ |
|
U8X8_DLY(50), |
|
|
|
U8X8_C(0x040), /* set display start line to 0 */ |
|
U8X8_C(0x090), /* no fixed lines */ |
|
U8X8_C(0x089), /* RAM access control */ |
|
|
|
U8X8_CA(0x081, 0x072), /* set contrast */ |
|
|
|
U8X8_C(0x000), /* column low nibble */ |
|
U8X8_C(0x010), /* column high nibble */ |
|
U8X8_C(0x0b0), /* page adr */ |
|
|
|
|
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
U8X8_END() /* end of sequence */ |
|
}; |
|
|
|
uint8_t u8x8_d_uc1608_240x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) |
|
{ |
|
/* call common procedure first and handle messages there */ |
|
if ( u8x8_d_uc1608_common(u8x8, msg, arg_int, arg_ptr) == 0 ) |
|
{ |
|
/* msg not handled, then try here */ |
|
switch(msg) |
|
{ |
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY: |
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_uc1608_240x128_display_info); |
|
break; |
|
case U8X8_MSG_DISPLAY_INIT: |
|
u8x8_d_helper_display_init(u8x8); |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1608_240x128_init_seq); |
|
break; |
|
default: |
|
return 0; /* msg unknown */ |
|
} |
|
} |
|
return 1; |
|
} |
|
|
|
/*================================================*/ |
|
/* experimental implementation for the uc1608 erc240x120 */ |
|
|
|
static const u8x8_display_info_t u8x8_uc1608_erc240120_display_info = |
|
{ |
|
/* chip_enable_level = */ 1, /* uc1608 has high active CS */ |
|
/* chip_disable_level = */ 0, |
|
|
|
/* post_chip_enable_wait_ns = */ 10, /* uc1608 datasheet, page 39, actually 0 */ |
|
/* pre_chip_disable_wait_ns = */ 20, /* uc1608 datasheet, page 39 */ |
|
/* reset_pulse_width_ms = */ 1, /* uc1608 datasheet, page 42 */ |
|
/* post_reset_wait_ms = */ 10, |
|
/* sda_setup_time_ns = */ 30, /* uc1608 datasheet, page 41 */ |
|
/* sck_pulse_width_ns = */ 65, /* half of cycle time */ |
|
/* sck_clock_hz = */ 8000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */ |
|
/* spi_mode = */ 0, /* active high, rising edge */ |
|
/* i2c_bus_clock_100kHz = */ 4, |
|
/* data_setup_time_ns = */ 30, /* uc1608 datasheet, page 39 */ |
|
/* write_pulse_width_ns = */ 35, /* uc1608 datasheet, page 39 */ |
|
/* tile_width = */ 30, /* width of 30*8=240 pixel */ |
|
/* tile_hight = */ 15, |
|
/* default_x_offset = */ 1, /* reused as y page offset */ |
|
/* flipmode_x_offset = */ 0, /* reused as y page offset */ |
|
/* pixel_width = */ 240, |
|
/* pixel_height = */ 120 |
|
}; |
|
|
|
/* http://www.buydisplay.com/download/democode/ERC240120-1_DemoCode.txt */ |
|
static const uint8_t u8x8_d_uc1608_erc240120_init_seq[] = { |
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
|
|
U8X8_C(0x0e2), /* soft reset */ |
|
U8X8_DLY(200), |
|
|
|
//U8X8_C(0x023), /* Bit 0/1: Temp compenstation, Bit 2: Multiplex Rate 0=96, 1=128 */ |
|
U8X8_C(0x026), /* Bit 0/1: Temp compenstation, Bit 2: Multiplex Rate 0=96, 1=128 */ |
|
|
|
U8X8_C(0x0c8), /* Map control, Bit 3: MY=1, Bit 2: MX=0, Bit 0: MSF =0 */ |
|
U8X8_C(0x0ea), /* LCD bias Bits 0/1: 00=10.7 01=10.3, 10=12.0, 11=12.7 */ |
|
/* according to DemoCode.txt */ |
|
|
|
U8X8_C(0x02f), /* power on, Bit 2 PC2=1 (internal charge pump), Bits 0/1: cap of panel */ |
|
U8X8_DLY(50), |
|
|
|
U8X8_C(0x040), /* set display start line to 0 */ |
|
U8X8_C(0x090), /* no fixed lines */ |
|
U8X8_C(0x089), /* RAM access control */ |
|
|
|
//U8X8_CA(0x081, 46), /* set contrast, 46 according to DemoCode.txt */ |
|
U8X8_CA(0x081, 80), /* */ |
|
|
|
U8X8_C(0x000), /* column low nibble */ |
|
U8X8_C(0x010), /* column high nibble */ |
|
U8X8_C(0x0b0), /* page adr */ |
|
|
|
|
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
U8X8_END() /* end of sequence */ |
|
}; |
|
|
|
uint8_t u8x8_d_uc1608_erc240120(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) |
|
{ |
|
/* call common procedure first and handle messages there */ |
|
if ( u8x8_d_uc1608_common(u8x8, msg, arg_int, arg_ptr) == 0 ) |
|
{ |
|
/* msg not handled, then try here */ |
|
switch(msg) |
|
{ |
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY: |
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_uc1608_erc240120_display_info); |
|
break; |
|
case U8X8_MSG_DISPLAY_INIT: |
|
u8x8_d_helper_display_init(u8x8); |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1608_erc240120_init_seq); |
|
break; |
|
default: |
|
return 0; /* msg unknown */ |
|
} |
|
} |
|
return 1; |
|
} |
|
|
|
/*================================================*/
|
|
|