You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
404 lines
14 KiB
404 lines
14 KiB
/* |
|
|
|
u8x8_d_max7219.c |
|
|
|
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/) |
|
|
|
Copyright (c) 2017, olikraus@gmail.com |
|
All rights reserved. |
|
|
|
Redistribution and use in source and binary forms, with or without modification, |
|
are permitted provided that the following conditions are met: |
|
|
|
* Redistributions of source code must retain the above copyright notice, this list |
|
of conditions and the following disclaimer. |
|
|
|
* Redistributions in binary form must reproduce the above copyright notice, this |
|
list of conditions and the following disclaimer in the documentation and/or other |
|
materials provided with the distribution. |
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND |
|
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, |
|
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
|
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR |
|
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
|
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
|
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
|
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF |
|
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|
|
|
*/ |
|
|
|
|
|
#include "u8x8.h" |
|
|
|
|
|
|
|
static const uint8_t u8x8_d_max7219_init_seq[] = { |
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_CA(15, 0), /* test mode off */ |
|
U8X8_CA(15, 0), /* test mode off */ |
|
U8X8_CA(15, 0), /* test mode off */ |
|
U8X8_CA(15, 0), /* test mode off */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_CA(12, 0), /* */ |
|
U8X8_CA(12, 0), /* */ |
|
U8X8_CA(12, 0), /* */ |
|
U8X8_CA(12, 0), /* */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_CA(9, 0), /* decode mode: graphics */ |
|
U8X8_CA(9, 0), /* decode mode: graphics */ |
|
U8X8_CA(9, 0), /* decode mode: graphics */ |
|
U8X8_CA(9, 0), /* decode mode: graphics */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_CA(10, 10), /* medium high intensity */ |
|
U8X8_CA(10, 10), /* medium high intensity */ |
|
U8X8_CA(10, 10), /* medium high intensity */ |
|
U8X8_CA(10, 10), /* medium high intensity */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */ |
|
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */ |
|
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */ |
|
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
|
|
|
|
//U8X8_CA(12, 0), /* shutdown */ |
|
|
|
//U8X8_END_TRANSFER(), /* disable chip */ |
|
U8X8_END() /* end of sequence */ |
|
}; |
|
|
|
static const uint8_t u8x8_d_max7219_powersave0_seq[] = { |
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_CA(12, 1), /* display on */ |
|
U8X8_CA(12, 1), /* display on */ |
|
U8X8_CA(12, 1), /* display on */ |
|
U8X8_CA(12, 1), /* display on */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
U8X8_END() /* end of sequence */ |
|
}; |
|
|
|
static const uint8_t u8x8_d_max7219_powersave1_seq[] = { |
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_CA(12, 0), /* shutdown */ |
|
U8X8_CA(12, 0), /* shutdown */ |
|
U8X8_CA(12, 0), /* shutdown */ |
|
U8X8_CA(12, 0), /* shutdown */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
U8X8_END() /* end of sequence */ |
|
}; |
|
|
|
|
|
static uint8_t u8x8_d_max7219_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) |
|
{ |
|
uint8_t c, j, i; |
|
uint8_t *ptr; |
|
switch(msg) |
|
{ |
|
/* handled by the calling function |
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY: |
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_pcf8812_96x65_display_info); |
|
break; |
|
case U8X8_MSG_DISPLAY_INIT: |
|
u8x8_d_helper_display_init(u8x8); |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_init_seq); |
|
break; |
|
case U8X8_MSG_DISPLAY_SET_POWER_SAVE: |
|
if ( arg_int == 0 ) |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_powersave0_seq); |
|
else |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_powersave1_seq); |
|
break; |
|
*/ |
|
/* not supported by MAX7219 |
|
case U8X8_MSG_DISPLAY_SET_FLIP_MODE: |
|
break; |
|
*/ |
|
#ifdef U8X8_WITH_SET_CONTRAST |
|
case U8X8_MSG_DISPLAY_SET_CONTRAST: |
|
u8x8_cad_StartTransfer(u8x8); |
|
for( i = 0; i < u8x8->display_info->tile_width; i++ ) |
|
{ |
|
u8x8_cad_SendCmd(u8x8, 10 ); /* brightness */ |
|
u8x8_cad_SendArg(u8x8, (arg_int>>4) ); /* 0..15 for contrast */ |
|
} |
|
u8x8_cad_EndTransfer(u8x8); |
|
break; |
|
#endif |
|
case U8X8_MSG_DISPLAY_DRAW_TILE: |
|
/* transfer always has to start at x pos 0 (u8x8 is not supported) */ |
|
/* also y pos has to be 0 */ |
|
/* arg_int is ignored */ |
|
//x = ((u8x8_tile_t *)arg_ptr)->x_pos; |
|
|
|
c = ((u8x8_tile_t *)arg_ptr)->cnt; /* number of tiles */ |
|
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr; /* data ptr to the tiles */ |
|
for( i = 0; i < 8; i++ ) |
|
{ |
|
u8x8_cad_StartTransfer(u8x8); |
|
for( j = 0; j < c; j++ ) |
|
{ |
|
u8x8_cad_SendCmd(u8x8, i+1); |
|
u8x8_cad_SendArg(u8x8, *ptr ); |
|
ptr++; |
|
} |
|
u8x8_cad_EndTransfer(u8x8); |
|
} |
|
|
|
break; |
|
default: |
|
return 0; |
|
} |
|
return 1; |
|
} |
|
|
|
/*==============================*/ |
|
|
|
static const u8x8_display_info_t u8x8_max7219_32x8_display_info = |
|
{ |
|
/* chip_enable_level = */ 0, |
|
/* chip_disable_level = */ 1, |
|
|
|
/* post_chip_enable_wait_ns = */ 100, |
|
/* pre_chip_disable_wait_ns = */ 100, |
|
/* reset_pulse_width_ms = */ 100, |
|
/* post_reset_wait_ms = */ 100, |
|
/* sda_setup_time_ns = */ 100, |
|
/* sck_pulse_width_ns = */ 100, |
|
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */ |
|
/* spi_mode = */ 0, /* active high, rising edge */ |
|
/* i2c_bus_clock_100kHz = */ 4, |
|
/* data_setup_time_ns = */ 40, |
|
/* write_pulse_width_ns = */ 150, |
|
/* tile_width = */ 4, |
|
/* tile_hight = */ 1, |
|
/* default_x_offset = */ 0, |
|
/* flipmode_x_offset = */ 0, |
|
/* pixel_width = */ 32, |
|
/* pixel_height = */ 8 |
|
}; |
|
|
|
uint8_t u8x8_d_max7219_32x8(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) |
|
{ |
|
switch(msg) |
|
{ |
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY : |
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_max7219_32x8_display_info); |
|
return 1; |
|
case U8X8_MSG_DISPLAY_INIT: |
|
u8x8_d_helper_display_init(u8x8); |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_init_seq); |
|
return 1; |
|
case U8X8_MSG_DISPLAY_SET_POWER_SAVE: |
|
if ( arg_int == 0 ) |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_powersave0_seq); |
|
else |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_powersave1_seq); |
|
return 1; |
|
} |
|
return u8x8_d_max7219_generic(u8x8, msg, arg_int, arg_ptr); |
|
} |
|
|
|
/*==============================*/ |
|
|
|
static const u8x8_display_info_t u8x8_max7219_8x8_display_info = |
|
{ |
|
/* chip_enable_level = */ 0, |
|
/* chip_disable_level = */ 1, |
|
|
|
/* post_chip_enable_wait_ns = */ 100, |
|
/* pre_chip_disable_wait_ns = */ 100, |
|
/* reset_pulse_width_ms = */ 100, |
|
/* post_reset_wait_ms = */ 100, |
|
/* sda_setup_time_ns = */ 100, |
|
/* sck_pulse_width_ns = */ 100, |
|
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */ |
|
/* spi_mode = */ 0, /* active high, rising edge */ |
|
/* i2c_bus_clock_100kHz = */ 4, |
|
/* data_setup_time_ns = */ 40, |
|
/* write_pulse_width_ns = */ 150, |
|
/* tile_width = */ 1, |
|
/* tile_hight = */ 1, |
|
/* default_x_offset = */ 0, |
|
/* flipmode_x_offset = */ 0, |
|
/* pixel_width = */ 8, |
|
/* pixel_height = */ 8 |
|
}; |
|
|
|
uint8_t u8x8_d_max7219_8x8(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) |
|
{ |
|
switch(msg) |
|
{ |
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY : |
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_max7219_8x8_display_info); |
|
return 1; |
|
case U8X8_MSG_DISPLAY_INIT: |
|
u8x8_d_helper_display_init(u8x8); |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_init_seq); |
|
return 1; |
|
case U8X8_MSG_DISPLAY_SET_POWER_SAVE: |
|
if ( arg_int == 0 ) |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_powersave0_seq); |
|
else |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_powersave1_seq); |
|
return 1; |
|
} |
|
return u8x8_d_max7219_generic(u8x8, msg, arg_int, arg_ptr); |
|
} |
|
|
|
|
|
/*==============================*/ |
|
|
|
static const uint8_t u8x8_d_max7219_8_init_seq[] = { |
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_CA(15, 0), /* test mode off */ |
|
U8X8_CA(15, 0), /* test mode off */ |
|
U8X8_CA(15, 0), /* test mode off */ |
|
U8X8_CA(15, 0), /* test mode off */ |
|
U8X8_CA(15, 0), /* test mode off */ |
|
U8X8_CA(15, 0), /* test mode off */ |
|
U8X8_CA(15, 0), /* test mode off */ |
|
U8X8_CA(15, 0), /* test mode off */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_CA(12, 0), /* */ |
|
U8X8_CA(12, 0), /* */ |
|
U8X8_CA(12, 0), /* */ |
|
U8X8_CA(12, 0), /* */ |
|
U8X8_CA(12, 0), /* */ |
|
U8X8_CA(12, 0), /* */ |
|
U8X8_CA(12, 0), /* */ |
|
U8X8_CA(12, 0), /* */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_CA(9, 0), /* decode mode: graphics */ |
|
U8X8_CA(9, 0), /* decode mode: graphics */ |
|
U8X8_CA(9, 0), /* decode mode: graphics */ |
|
U8X8_CA(9, 0), /* decode mode: graphics */ |
|
U8X8_CA(9, 0), /* decode mode: graphics */ |
|
U8X8_CA(9, 0), /* decode mode: graphics */ |
|
U8X8_CA(9, 0), /* decode mode: graphics */ |
|
U8X8_CA(9, 0), /* decode mode: graphics */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_CA(10, 10), /* medium high intensity */ |
|
U8X8_CA(10, 10), /* medium high intensity */ |
|
U8X8_CA(10, 10), /* medium high intensity */ |
|
U8X8_CA(10, 10), /* medium high intensity */ |
|
U8X8_CA(10, 10), /* medium high intensity */ |
|
U8X8_CA(10, 10), /* medium high intensity */ |
|
U8X8_CA(10, 10), /* medium high intensity */ |
|
U8X8_CA(10, 10), /* medium high intensity */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */ |
|
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */ |
|
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */ |
|
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */ |
|
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */ |
|
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */ |
|
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */ |
|
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
|
|
|
|
//U8X8_CA(12, 0), /* shutdown */ |
|
|
|
//U8X8_END_TRANSFER(), /* disable chip */ |
|
U8X8_END() /* end of sequence */ |
|
}; |
|
|
|
static const uint8_t u8x8_d_max7219_8_powersave0_seq[] = { |
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_CA(12, 1), /* display on */ |
|
U8X8_CA(12, 1), /* display on */ |
|
U8X8_CA(12, 1), /* display on */ |
|
U8X8_CA(12, 1), /* display on */ |
|
U8X8_CA(12, 1), /* display on */ |
|
U8X8_CA(12, 1), /* display on */ |
|
U8X8_CA(12, 1), /* display on */ |
|
U8X8_CA(12, 1), /* display on */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
U8X8_END() /* end of sequence */ |
|
}; |
|
|
|
static const uint8_t u8x8_d_max7219_8_powersave1_seq[] = { |
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
U8X8_CA(12, 0), /* shutdown */ |
|
U8X8_CA(12, 0), /* shutdown */ |
|
U8X8_CA(12, 0), /* shutdown */ |
|
U8X8_CA(12, 0), /* shutdown */ |
|
U8X8_CA(12, 0), /* shutdown */ |
|
U8X8_CA(12, 0), /* shutdown */ |
|
U8X8_CA(12, 0), /* shutdown */ |
|
U8X8_CA(12, 0), /* shutdown */ |
|
U8X8_END_TRANSFER(), /* disable chip */ |
|
U8X8_END() /* end of sequence */ |
|
}; |
|
|
|
|
|
static const u8x8_display_info_t u8x8_max7219_64x8_display_info = |
|
{ |
|
/* chip_enable_level = */ 0, |
|
/* chip_disable_level = */ 1, |
|
|
|
/* post_chip_enable_wait_ns = */ 100, |
|
/* pre_chip_disable_wait_ns = */ 100, |
|
/* reset_pulse_width_ms = */ 100, |
|
/* post_reset_wait_ms = */ 100, |
|
/* sda_setup_time_ns = */ 100, |
|
/* sck_pulse_width_ns = */ 100, |
|
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */ |
|
/* spi_mode = */ 0, /* active high, rising edge */ |
|
/* i2c_bus_clock_100kHz = */ 4, |
|
/* data_setup_time_ns = */ 40, |
|
/* write_pulse_width_ns = */ 150, |
|
/* tile_width = */ 8, |
|
/* tile_hight = */ 1, |
|
/* default_x_offset = */ 0, |
|
/* flipmode_x_offset = */ 0, |
|
/* pixel_width = */ 64, |
|
/* pixel_height = */ 8 |
|
}; |
|
|
|
uint8_t u8x8_d_max7219_64x8(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) |
|
{ |
|
switch(msg) |
|
{ |
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY : |
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_max7219_64x8_display_info); |
|
return 1; |
|
case U8X8_MSG_DISPLAY_INIT: |
|
u8x8_d_helper_display_init(u8x8); |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_8_init_seq); |
|
return 1; |
|
case U8X8_MSG_DISPLAY_SET_POWER_SAVE: |
|
if ( arg_int == 0 ) |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_8_powersave0_seq); |
|
else |
|
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_8_powersave1_seq); |
|
return 1; |
|
} |
|
return u8x8_d_max7219_generic(u8x8, msg, arg_int, arg_ptr); |
|
} |
|
|
|
|
|
|