amikhalev
/
uas-ugv
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
107 Commits
5 Branches
0 Tags
349 MiB
 
 
 
 
 
Tree: 1138da8912
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '1138da8912'
${ noResults }
uas-ugv/components/u8g2/csrc/u8x8_d_st7588.c

256 lines
8.2 KiB
Raw Blame History

/*
u8x8_d_st7588.c
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
Copyright (c) 2017, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
ST7588
- has 4 different I2C addresses
- I2C protocol is identical to SSD13xx
*/
#include "u8x8.h"
/* function set, bit 2: power down, bit 3: MY, bit 4: MX, bit 5: must be 1 */
#define FS (0x020)
/* not a real power down for the ST7588... just a display off */
static const uint8_t u8x8_d_st7588_128x64_powersave0_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_C( FS | 0x00 ), /* select 00 commands */
//U8X8_C( 0x08 ), /* display off */
U8X8_C( 0x0c ), /* display on */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const uint8_t u8x8_d_st7588_128x64_powersave1_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_C( FS | 0x00 ), /* select 00 commands */
U8X8_C( 0x08 ), /* display off */
//U8X8_C( 0x0c ), /* display on */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static uint8_t u8x8_d_st7588_128x64_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
{
uint8_t x, c;
uint8_t *ptr;
switch(msg)
{
/* handled by the calling function
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_st7588_128x64_display_info);
break;
*/
/* handled by the calling function
case U8X8_MSG_DISPLAY_INIT:
u8x8_d_helper_display_init(u8x8);
u8x8_cad_SendSequence(u8x8, u8x8_d_st7588_128x64_init_seq);
break;
*/
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
if ( arg_int == 0 )
u8x8_cad_SendSequence(u8x8, u8x8_d_st7588_128x64_powersave0_seq);
else
u8x8_cad_SendSequence(u8x8, u8x8_d_st7588_128x64_powersave1_seq);
/* restore orientation */
if ( u8x8->x_offset == 0 )
u8x8_cad_SendCmd(u8x8, FS ); /* select 00 commands */
else
u8x8_cad_SendCmd(u8x8, FS ^ 0x018 ); /* select 00 commands */
break;
#ifdef U8X8_WITH_SET_CONTRAST
case U8X8_MSG_DISPLAY_SET_CONTRAST:
u8x8_cad_StartTransfer(u8x8);
u8x8_cad_SendCmd(u8x8, FS );
u8x8_cad_SendArg(u8x8, 4 | (arg_int>>7) );
u8x8_cad_SendCmd(u8x8, FS | 1);
u8x8_cad_SendArg(u8x8, 0x080 | arg_int );
/* restore orientation */
if ( u8x8->x_offset == 0 )
u8x8_cad_SendCmd(u8x8, FS ); /* select 00 commands */
else
u8x8_cad_SendCmd(u8x8, FS ^ 0x018 ); /* select 00 commands */
u8x8_cad_EndTransfer(u8x8);
break;
#endif
case U8X8_MSG_DISPLAY_DRAW_TILE:
u8x8_cad_StartTransfer(u8x8);
x = ((u8x8_tile_t *)arg_ptr)->x_pos;
x *= 8;
x += u8x8->x_offset;
if ( u8x8->x_offset == 0 )
u8x8_cad_SendCmd(u8x8, FS ); /* select 00 commands */
else
u8x8_cad_SendCmd(u8x8, FS ^ 0x018 ); /* select 00 commands */
u8x8_cad_SendCmd(u8x8, 0x040 | (((u8x8_tile_t *)arg_ptr)->y_pos));
u8x8_cad_SendCmd(u8x8, 0x0e0 | ((x&15)));
u8x8_cad_SendCmd(u8x8, 0x0f0 | (x>>4) );
do
{
c = ((u8x8_tile_t *)arg_ptr)->cnt;
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
u8x8_cad_SendData(u8x8, c*8, ptr); /* note: SendData can not handle more than 255 bytes */
arg_int--;
} while( arg_int > 0 );
u8x8_cad_EndTransfer(u8x8);
break;
default:
return 0;
}
return 1;
}
/*=============================================*/
static const u8x8_display_info_t u8x8_st7588_128x64_display_info =
{
/* chip_enable_level = */ 0,
/* chip_disable_level = */ 1,
/* post_chip_enable_wait_ns = */ 150,
/* pre_chip_disable_wait_ns = */ 30,
/* reset_pulse_width_ms = */ 5,
/* post_reset_wait_ms = */ 5, /**/
/* sda_setup_time_ns = */ 60, /* */
/* sck_pulse_width_ns = */ 60, /* */
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
/* spi_mode = */ 0, /* active high, rising edge */
/* i2c_bus_clock_100kHz = */ 4, /* 400KHz */
/* data_setup_time_ns = */ 80,
/* write_pulse_width_ns = */ 50,
/* tile_width = */ 16,
/* tile_hight = */ 8,
/* default_x_offset = */ 0, /* must be 0, because this is checked also for normal mode */
/* flipmode_x_offset = */ 4,
/* pixel_width = */ 128,
/* pixel_height = */ 64
};
static const uint8_t u8x8_d_st7588_128x64_init_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_C( FS | 0x03 ), /* select 11 commands */
U8X8_C( 0x03 ), /* software reset */
U8X8_C( FS | 0x00 ), /* select 00 commands */
U8X8_C( 0x08 ), /* display off */
//U8X8_C( 0x0c ), /* display on */
U8X8_C( FS | 0x01 ), /* select 01 commands */
U8X8_C( 0x08 ), /* display confguration */
U8X8_C( 0x12 ), /* bias 1/9 */
U8X8_C( 0x8f ), /* Vop, lower 7 bits */
U8X8_C( FS | 0x00 ), /* select 00 commands */
U8X8_C( 0x05), /* Bit 0 contains high/low range for Vop */
U8X8_C( FS | 0x03 ), /* select 11 commands */
U8X8_C( 0x0b), /* Frame Rate: 73 Hz */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const uint8_t u8x8_d_st7588_jlx12864_flip0_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_C( FS ), /* normal mode */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const uint8_t u8x8_d_st7588_jlx12864_flip1_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_C( FS ^ 0x018 ), /* normal mode */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
uint8_t u8x8_d_st7588_jlx12864(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
{
if ( u8x8_d_st7588_128x64_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
return 1;
if ( msg == U8X8_MSG_DISPLAY_SETUP_MEMORY )
{
u8x8_SetI2CAddress(u8x8, 0x07e); /* the JLX12864 has 0x07e as a default address for I2C */
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_st7588_128x64_display_info);
return 1;
}
else if ( msg == U8X8_MSG_DISPLAY_INIT )
{
u8x8_d_helper_display_init(u8x8);
u8x8_cad_SendSequence(u8x8, u8x8_d_st7588_128x64_init_seq);
return 1;
}
else if ( msg == U8X8_MSG_DISPLAY_SET_FLIP_MODE )
{
if ( arg_int == 0 )
{
u8x8_cad_SendSequence(u8x8, u8x8_d_st7588_jlx12864_flip0_seq);
u8x8->x_offset = u8x8->display_info->default_x_offset;
}
else
{
u8x8_cad_SendSequence(u8x8, u8x8_d_st7588_jlx12864_flip1_seq);
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
}
return 1;
}
return 0;
}