amikhalev
/
uas-ugv
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
Browse Source

Refactor sx127x_driver into a component

ugv_io
Alex Mikhalev 6 years ago
parent
1c5fbd725a
commit
85f816850b
8 changed files with 502 additions and 485 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 8
      components/sx127x_driver/CMakeLists.txt
  2. 175
      components/sx127x_driver/sx127x_driver.c
  3. 12
      components/sx127x_driver/sx127x_driver.h
  4. 112
      components/sx127x_driver/sx127x_internal.h
  5. 184
      components/sx127x_driver/sx127x_registers.c
  6. 20
      components/sx127x_driver/sx127x_registers.h
  7. 8
      main/CMakeLists.txt
  8. 468
      main/sx127x_driver/sx127x_driver.c

8
components/sx127x_driver/CMakeLists.txt
Unescape View File

@ -0,0 +1,8 @@ @@ -0,0 +1,8 @@
set(COMPONENT_SRCS
"sx127x_driver.c"
"sx127x_registers.c")
set(COMPONENT_ADD_INCLUDEDIRS ".")
register_component()
component_compile_options("-Werror=incompatible-pointer-types")

175
components/sx127x_driver/sx127x_driver.c
Unescape View File

@ -0,0 +1,175 @@ @@ -0,0 +1,175 @@
#include "sx127x_driver.h"
#include "sx127x_internal.h"
#include "sx127x_registers.h"
#include <esp_log.h>
#include <string.h>
const char *SX127X_TAG = "sx127x";
esp_err_t sx127x_init(sx127x_config_t *config, sx127x_t **handle_ptr) {
esp_err_t ret;
sx127x_t *handle = malloc(sizeof(sx127x_t));
SX127X_CHECK(handle != NULL, "malloc error", ESP_ERR_NO_MEM);
handle->task_handle = NULL;
memcpy(&handle->config, config, sizeof(sx127x_config_t));
ret = gpio_set_direction(config->rst_io_num, GPIO_MODE_OUTPUT);
SX127X_ERROR_CHECK2(ret, gpio_set_direction)
// perform reset
gpio_set_level(config->rst_io_num, 0);
vTaskDelay(RESET_DELAY);
gpio_set_level(config->rst_io_num, 1);
vTaskDelay(RESET_DELAY);
spi_bus_config_t bus_config = {.mosi_io_num = config->mosi_io_num,
.miso_io_num = config->miso_io_num,
.sclk_io_num = config->sck_io_num,
.quadhd_io_num = -1,
.quadwp_io_num = -1,
.max_transfer_sz = SX127X_MAX_TRANSFER};
ret = spi_bus_initialize(config->spi_host, &bus_config, 1);
SX127X_ERROR_CHECK2(ret, spi_bus_initialize)
spi_device_interface_config_t device_config = {
.command_bits = 0,
.address_bits = 8,
.dummy_bits = 0,
.mode = 0,
.duty_cycle_pos = 0,
.cs_ena_pretrans = 0,
.cs_ena_posttrans = 0,
.clock_speed_hz = SPI_CLOCK_HZ, // 8mhz
.input_delay_ns = 0,
.spics_io_num = config->cs_io_num,
.flags = 0,
.queue_size = 8,
.pre_cb = NULL,
.post_cb = NULL,
};
ret = spi_bus_add_device(config->spi_host, &device_config, &handle->device_handle);
SX127X_ERROR_CHECK2(ret, spi_bus_add_device)
// read version and check that it is compatible
uint8_t version;
ret = sx127x_read_register(handle, REG_VERSION, &version);
SX127X_ERROR_CHECK2(ret, sx127x_read_register);
SX127X_CHECK(version == 0x12, "unsupported version %#x", ESP_ERR_INVALID_VERSION, version);
ret = sx127x_sleep(handle);
SX127X_ERROR_CHECK(ret);
ret = sx127x_set_frequency(handle, config->frequency);
SX127X_ERROR_CHECK(ret);
ret = sx127x_write_register(handle, REG_FIFO_TX_BASE_ADDR, 0);
SX127X_ERROR_CHECK(ret);
sx127x_write_register(handle, REG_FIFO_RX_BASE_ADDR, 0);
SX127X_ERROR_CHECK(ret);
uint8_t reg_lna;
ret = sx127x_read_register(handle, REG_LNA, &reg_lna);
SX127X_ERROR_CHECK(ret);
reg_lna |= 0x03; // set LNA boost
ret = sx127x_write_register(handle, REG_LNA, reg_lna);
SX127X_ERROR_CHECK(ret);
// set auto AGC
ret = sx127x_write_register(handle, REG_MODEM_CONFIG_3, CONFIG3_AUTO_AGC);
SX127X_ERROR_CHECK(ret);
ret = sx127x_set_tx_power(handle, config->tx_power, true);
SX127X_ERROR_CHECK(ret);
ret = sx127x_set_spreading_factor(handle, config->spreading_factor);
SX127X_ERROR_CHECK(ret);
ret = sx127x_set_sync_word(handle, config->sync_word);
SX127X_ERROR_CHECK(ret);
ret = sx127x_set_crc(handle, config->crc);
SX127X_ERROR_CHECK(ret);
ret = sx127x_standby(handle);
ESP_ERROR_CHECK(ret);
*handle_ptr = handle;
return ESP_OK;
}
esp_err_t sx127x_free(sx127x_t *handle) {
esp_err_t ret;
if (handle->task_handle) {
ret = sx127x_stop(handle);
SX127X_ERROR_CHECK(ret);
}
ret = spi_bus_remove_device(handle->device_handle);
SX127X_ERROR_CHECK2(ret, spi_bus_remove_device)
ret = spi_bus_free(handle->config.spi_host);
SX127X_ERROR_CHECK2(ret, spi_bus_free)
free(handle);
return ESP_OK;
}
void sx127x_isr(void *arg) {
sx127x_t *handle = (sx127x_t *)arg;
ESP_LOGI(SX127X_TAG, "sx127x_isr");
}
void sx127x_task(void *arg) {
sx127x_t *handle = (sx127x_t *)arg;
while (handle->task_running) {
vTaskDelay(pdMS_TO_TICKS(10));
}
}
esp_err_t sx127x_start(sx127x_t *handle) {
esp_err_t ret;
SX127X_CHECK(handle->task_handle == NULL, "task already running", ESP_ERR_INVALID_STATE);
ret = sx127x_write_register(handle, REG_DIO_MAPPING_1, 0x00);
SX127X_ERROR_CHECK(ret);
gpio_config_t irq_io_config;
irq_io_config.intr_type = GPIO_INTR_POSEDGE;
irq_io_config.mode = GPIO_MODE_INPUT;
irq_io_config.pin_bit_mask = (1ULL << handle->config.irq_io_num);
irq_io_config.pull_down_en = 0;
irq_io_config.pull_up_en = 0;
ret = gpio_config(&irq_io_config);
SX127X_ERROR_CHECK2(ret, gpio_config)
ret = gpio_install_isr_service(ESP_INTR_FLAG_LEVEL1);
SX127X_ERROR_CHECK2(ret, gpio_install_isr_service);
ret = gpio_isr_handler_add(handle->config.irq_io_num, sx127x_isr, (void *)handle);
SX127X_ERROR_CHECK2(ret, gpio_isr_handler_add);
handle->task_running = true;
BaseType_t pdRet =
xTaskCreate(sx127x_task, "sx127x_task", TASK_STACK_SIZE, (void *)handle, TASK_PRIORITY, &handle->task_handle);
SX127X_CHECK(pdRet == pdPASS, "failed to create task", ESP_FAIL);
return ESP_OK;
}
esp_err_t sx127x_stop(sx127x_t *handle) {
esp_err_t ret;
SX127X_CHECK(handle->task_handle != NULL, "task has not been started", ESP_ERR_INVALID_STATE);
handle->task_running = false;
xTaskNotify(handle->task_handle, 0, eNoAction);
ret = gpio_isr_handler_remove(handle->config.irq_io_num);
SX127X_ERROR_CHECK2(ret, gpio_isr_handler_remove);
gpio_uninstall_isr_service();
return ESP_OK;
}

12
main/sx127x_driver/sx127x_driver.h → components/sx127x_driver/sx127x_driver.h
Unescape View File

@ -76,18 +76,6 @@ esp_err_t sx127x_init(sx127x_config_t *config, sx127x_t **handle_ptr); @@ -76,18 +76,6 @@ esp_err_t sx127x_init(sx127x_config_t *config, sx127x_t **handle_ptr);
esp_err_t sx127x_free(sx127x_t *handle);
esp_err_t sx127x_set_frequency(sx127x_t *handle, uint64_t frequency);
esp_err_t sx127x_set_tx_power(sx127x_t *handle, uint8_t tx_power, sx127x_pa_boost_t pa_boost);
esp_err_t sx127x_set_spreading_factor(sx127x_t *handle, uint8_t spreading_factor);
esp_err_t sx127x_set_signal_bandwidth(sx127x_t *handle, uint64_t signal_bandwidth);
esp_err_t sx127x_set_sync_word(sx127x_t *handle, uint8_t sync_word);
esp_err_t sx127x_set_crc(sx127x_t *handle, sx127x_crc_t crc);
esp_err_t sx127x_sleep(sx127x_t *handle);
esp_err_t sx127x_standby(sx127x_t *handle);

112
components/sx127x_driver/sx127x_internal.h
Unescape View File

@ -0,0 +1,112 @@ @@ -0,0 +1,112 @@
#include <esp_log.h>
#include <freertos/task.h>
#define MAX_PKT_LENGTH 255
#define RESET_DELAY (pdMS_TO_TICKS(15))
// 8mhz
#define SPI_CLOCK_HZ (8 * 1000 * 1000)
#define TASK_STACK_SIZE (2 * 1024)
#define TASK_PRIORITY 3
#define REG_FIFO 0x00
#define REG_OP_MODE 0x01
#define REG_FRF_MSB 0x06
#define REG_FRF_MID 0x07
#define REG_FRF_LSB 0x08
#define REG_PA_CONFIG 0x09
#define REG_OCP 0x0b
#define REG_LNA 0x0c
#define REG_FIFO_ADDR_PTR 0x0d
#define REG_FIFO_TX_BASE_ADDR 0x0e
#define REG_FIFO_RX_BASE_ADDR 0x0f
#define REG_FIFO_RX_CURRENT_ADDR 0x10
#define REG_IRQ_FLAGS 0x12
#define REG_RX_NB_BYTES 0x13
#define REG_PKT_SNR_VALUE 0x19
#define REG_PKT_RSSI_VALUE 0x1a
#define REG_MODEM_CONFIG_1 0x1d
#define REG_MODEM_CONFIG_2 0x1e
#define REG_PREAMBLE_MSB 0x20
#define REG_PREAMBLE_LSB 0x21
#define REG_PAYLOAD_LENGTH 0x22
#define REG_MODEM_CONFIG_3 0x26
#define REG_FREQ_ERROR_MSB 0x28
#define REG_FREQ_ERROR_MID 0x29
#define REG_FREQ_ERROR_LSB 0x2a
#define REG_RSSI_WIDEBAND 0x2c
#define REG_DETECTION_OPTIMIZE 0x31
#define REG_INVERTIQ 0x33
#define REG_DETECTION_THRESHOLD 0x37
#define REG_SYNC_WORD 0x39
#define REG_INVERTIQ2 0x3b
#define REG_DIO_MAPPING_1 0x40
#define REG_VERSION 0x42
#define REG_PA_DAC 0x4d
// modes
#define MODE_LONG_RANGE_MODE 0x80
#define MODE_SLEEP 0x00
#define MODE_STDBY 0x01
#define MODE_TX 0x03
#define MODE_RX_CONTINUOUS 0x05
#define MODE_RX_SINGLE 0x06
#define CONFIG2_CRC 0x04
#define CONFIG3_AUTO_AGC 0x04
// PA config
#define PA_BOOST 0x80
// IRQ masks
#define IRQ_TX_DONE_MASK 0x08
#define IRQ_PAYLOAD_CRC_ERROR_MASK 0x20
#define IRQ_RX_DONE_MASK 0x40
#ifdef NODEBUG
#define SX127X_CHECK(check, str, ret_val, ...) \
if (!(check)) { \
ESP_LOGE(SX127X_TAG, "%s(%d): " str, __FUNCTION__, __LINE__, ##__VA_ARGS__); \
return (ret_val); \
}
#define SX127X_ERROR_CHECK(ret) \
{ \
esp_err_t _error_code = (ret); \
if (_error_code != ESP_OK) { \
return _error_code; \
} \
}
#define SX127X_ERROR_CHECK2(ret, fun) SX127X_CHECK(ret)
#else
#define SX127X_CHECK(check, str, ret_val, ...) \
if (!(check)) { \
ESP_LOGE(SX127X_TAG, "%s(%d): " #check ": " str, __FUNCTION__, __LINE__, ##__VA_ARGS__); \
return (ret_val); \
}
#define SX127X_ERROR_CHECK(ret) \
{ \
esp_err_t _error_code = (ret); \
if (_error_code != ESP_OK) { \
const char *_error_name = esp_err_to_name(_error_code); \
ESP_LOGE(SX127X_TAG, "%s(%d): %s (%d)", __FUNCTION__, __LINE__, _error_name, _error_code); \
return _error_code; \
} \
}
#define SX127X_ERROR_CHECK2(ret, fun) \
{ \
esp_err_t _error_code = (ret); \
if (_error_code != ESP_OK) { \
const char *_error_name = esp_err_to_name(_error_code); \
ESP_LOGE(SX127X_TAG, "%s(%d): " #fun ": %s (%d)", __FUNCTION__, __LINE__, _error_name, _error_code); \
return _error_code; \
} \
}
#endif
struct sx127x {
sx127x_config_t config;
spi_device_handle_t device_handle;
TaskHandle_t task_handle;
bool task_running;
};
const char *SX127X_TAG;

184
components/sx127x_driver/sx127x_registers.c
Unescape View File

@ -0,0 +1,184 @@ @@ -0,0 +1,184 @@
#include "sx127x_registers.h"
#include "sx127x_internal.h"
#include <string.h>
esp_err_t sx127x_read_register(sx127x_t *handle, uint8_t reg, uint8_t *value) {
return sx127x_single_transfer(handle, reg & 0x7f, 0x00, value);
}
esp_err_t sx127x_write_register(sx127x_t *handle, uint8_t reg, uint8_t value) {
return sx127x_single_transfer(handle, reg | 0x80, value, NULL);
}
esp_err_t sx127x_single_transfer(sx127x_t *handle, uint8_t addr, uint8_t to_slave, uint8_t *from_slave) {
spi_transaction_t trans;
memset(&trans, 0, sizeof(trans));
trans.flags = SPI_TRANS_USE_RXDATA | SPI_TRANS_USE_TXDATA;
trans.addr = addr;
trans.length = 8;
trans.rxlength = 8;
trans.tx_data[0] = to_slave;
esp_err_t ret = spi_device_transmit(handle->device_handle, &trans);
SX127X_ERROR_CHECK2(ret, spi_device_transmit);
if (from_slave) {
*from_slave = trans.rx_data[0];
}
ESP_LOGV(SX127X_TAG, "sx127x_single_transfer(%#x, %#x, %#x)", addr, trans.tx_data[0], trans.rx_data[0]);
return ESP_OK;
}
esp_err_t sx127x_sleep(sx127x_t *handle) {
return sx127x_write_register(handle, REG_OP_MODE, MODE_LONG_RANGE_MODE | MODE_SLEEP);
}
esp_err_t sx127x_standby(sx127x_t *handle) {
return sx127x_write_register(handle, REG_OP_MODE, MODE_LONG_RANGE_MODE | MODE_STDBY);
}
esp_err_t sx127x_set_frequency(sx127x_t *handle, uint64_t frequency) {
uint64_t frf = ((uint64_t)frequency << 19) / 32000000;
esp_err_t ret;
ret = sx127x_write_register(handle, REG_FRF_MSB, (uint8_t)(frf));
SX127X_ERROR_CHECK(ret);
frf >>= 8;
ret = sx127x_write_register(handle, REG_FRF_MID, (uint8_t)(frf));
SX127X_ERROR_CHECK(ret);
frf >>= 8;
ret = sx127x_write_register(handle, REG_FRF_LSB, (uint8_t)(frf));
SX127X_ERROR_CHECK(ret);
handle->config.frequency = frequency;
return ESP_OK;
}
esp_err_t sx127x_set_tx_power(sx127x_t *handle, uint8_t tx_power, sx127x_pa_boost_t pa_boost) {
esp_err_t ret;
if (pa_boost == SX127X_PA_BOOST_ENABLED) {
// PA BOOST
SX127X_CHECK(tx_power >= 2 && tx_power <= 20, "invalid tx_power: %d", ESP_ERR_INVALID_ARG, tx_power);
ret = sx127x_write_register(handle, REG_PA_CONFIG, PA_BOOST | (tx_power - 2));
} else {
// RFO
SX127X_CHECK(tx_power <= 14, "invalid tx_power: %d", ESP_ERR_INVALID_ARG, tx_power);
ret = sx127x_write_register(handle, REG_PA_CONFIG, 0x70 | tx_power);
}
SX127X_ERROR_CHECK(ret);
handle->config.tx_power = tx_power;
return ESP_OK;
}
esp_err_t sx127x_set_spreading_factor(sx127x_t *handle, uint8_t spreading_factor) {
SX127X_CHECK(spreading_factor >= 6 && spreading_factor <= 12, "invalid spreading_factor", ESP_ERR_INVALID_ARG);
// section 4.1.1.2 in SX1276 datasheet
uint8_t detection_optimize, detection_threshold;
if (spreading_factor == 6) {
detection_optimize = 0xc5;
detection_threshold = 0x0c;
} else {
detection_optimize = 0xc3;
detection_threshold = 0x0a;
}
SX127X_ERROR_CHECK(sx127x_write_register(handle, REG_DETECTION_OPTIMIZE, detection_optimize));
SX127X_ERROR_CHECK(sx127x_write_register(handle, REG_DETECTION_THRESHOLD, detection_threshold));
uint8_t modem_config_3;
SX127X_ERROR_CHECK(sx127x_read_register(handle, REG_MODEM_CONFIG_3, &modem_config_3));
modem_config_3 = (modem_config_3 & 0x03) | ((spreading_factor << 4) & 0xf0);
SX127X_ERROR_CHECK(sx127x_write_register(handle, REG_MODEM_CONFIG_3, modem_config_3));
handle->config.spreading_factor = spreading_factor;
return ESP_OK;
}
esp_err_t sx127x_set_signal_bandwidth(sx127x_t *handle, uint64_t signal_bandwidth) {
uint8_t bw_reg = sx127x_bw_to_reg(signal_bandwidth);
uint8_t modem_config_1;
SX127X_ERROR_CHECK(sx127x_read_register(handle, REG_MODEM_CONFIG_1, &modem_config_1));
modem_config_1 = (modem_config_1 & 0x0f) | (bw_reg << 4);
SX127X_ERROR_CHECK(sx127x_write_register(handle, REG_MODEM_CONFIG_1, modem_config_1));
handle->config.signal_bandwidth = signal_bandwidth;
// set low data rate optimization flag
uint64_t bw = sx127x_reg_to_bw(bw_reg);
uint8_t sf = handle->config.spreading_factor;
// section 4.1.1.5
uint64_t symbol_duration_ms = 1000 / (bw / (1L << sf));
// section 4.1.1.6
bool must_have_ldo = (symbol_duration_ms > 16);
bool ldo = must_have_ldo || (handle->config.ldo == SX127X_LDO_ENABLED);
uint8_t modem_config_3;
SX127X_ERROR_CHECK(sx127x_read_register(handle, REG_MODEM_CONFIG_3, &modem_config_3));
if (ldo) {
modem_config_3 |= (1 << 3);
} else {
modem_config_3 &= ~(1 << 3);
}
SX127X_ERROR_CHECK(sx127x_write_register(handle, REG_MODEM_CONFIG_3, modem_config_3));
return ESP_OK;
}
uint8_t sx127x_bw_to_reg(uint64_t bandwidth) {
if (bandwidth <= 7.8E3) {
return 0;
} else if (bandwidth <= 10.4E3) {
return 1;
} else if (bandwidth <= 15.6E3) {
return 2;
} else if (bandwidth <= 20.8E3) {
return 3;
} else if (bandwidth <= 31.25E3) {
return 4;
} else if (bandwidth <= 41.7E3) {
return 5;
} else if (bandwidth <= 62.5E3) {
return 6;
} else if (bandwidth <= 125E3) {
return 7;
} else if (bandwidth <= 250E3) {
return 8;
} else /* if (bandwidth <= 500E3) */ {
return 9;
}
}
uint64_t sx127x_reg_to_bw(uint8_t bandwidth_reg) {
switch (bandwidth_reg) {
case 0: return 7.8E3;
case 1: return 10.4E3;
case 2: return 15.6E3;
case 3: return 20.8E3;
case 4: return 31.25E3;
case 5: return 41.7E3;
case 6: return 62.5E3;
case 7: return 125E3;
case 8: return 250E3;
default:
case 9: return 500E3;
}
}
esp_err_t sx127x_set_sync_word(sx127x_t *handle, uint8_t sync_word) {
SX127X_ERROR_CHECK(sx127x_write_register(handle, REG_SYNC_WORD, sync_word));
handle->config.sync_word = sync_word;
return ESP_OK;
}
esp_err_t sx127x_set_crc(sx127x_t *handle, sx127x_crc_t crc) {
uint8_t modem_config_2;
SX127X_ERROR_CHECK(sx127x_read_register(handle, REG_MODEM_CONFIG_2, &modem_config_2));
if (crc == SX127X_CRC_ENABLED) {
modem_config_2 |= CONFIG2_CRC;
} else {
modem_config_2 &= ~CONFIG2_CRC;
}
SX127X_ERROR_CHECK(sx127x_write_register(handle, REG_MODEM_CONFIG_2, modem_config_2));
handle->config.crc = crc;
return ESP_OK;
}

20
components/sx127x_driver/sx127x_registers.h
Unescape View File

@ -0,0 +1,20 @@ @@ -0,0 +1,20 @@
#include "sx127x_driver.h"
esp_err_t sx127x_read_register(sx127x_t *handle, uint8_t reg, uint8_t *value);
esp_err_t sx127x_write_register(sx127x_t *handle, uint8_t reg, uint8_t value);
esp_err_t sx127x_single_transfer(sx127x_t *handle, uint8_t addr, uint8_t to_slave, uint8_t *from_slave);
uint8_t sx127x_bw_to_reg(uint64_t bandwidth);
uint64_t sx127x_reg_to_bw(uint8_t bandwidth_reg);
esp_err_t sx127x_set_frequency(sx127x_t *handle, uint64_t frequency);
esp_err_t sx127x_set_tx_power(sx127x_t *handle, uint8_t tx_power, sx127x_pa_boost_t pa_boost);
esp_err_t sx127x_set_spreading_factor(sx127x_t *handle, uint8_t spreading_factor);
esp_err_t sx127x_set_signal_bandwidth(sx127x_t *handle, uint64_t signal_bandwidth);
esp_err_t sx127x_set_sync_word(sx127x_t *handle, uint8_t sync_word);
esp_err_t sx127x_set_crc(sx127x_t *handle, sx127x_crc_t crc);

8
main/CMakeLists.txt
Unescape View File

@ -1,9 +1,7 @@ @@ -1,9 +1,7 @@
set(COMPONENT_SRCS "ugv_main.c"
"u8g2_esp32_hal.c"
"sx127x_driver/sx127x_driver.c")
set(COMPONENT_ADD_INCLUDEDIRS "."
"./sx127x_driver")
set(COMPONENT_REQUIRES "u8g2")
"u8g2_esp32_hal.c")
set(COMPONENT_ADD_INCLUDEDIRS ".")
set(COMPONENT_REQUIRES "u8g2" "sx127x_driver")
register_component()

468
main/sx127x_driver/sx127x_driver.c
Unescape View File

@ -1,468 +0,0 @@ @@ -1,468 +0,0 @@
#include "sx127x_driver.h"
#include <esp_log.h>
#include <freertos/task.h>
#include <string.h>
static const char *TAG = "sx127x";
#define MAX_PKT_LENGTH 255
#define RESET_DELAY (pdMS_TO_TICKS(15))
// 8mhz
#define SPI_CLOCK_HZ (8 * 1000 * 1000)
#define TASK_STACK_SIZE (2 * 1024)
#define TASK_PRIORITY 3
#define REG_FIFO 0x00
#define REG_OP_MODE 0x01
#define REG_FRF_MSB 0x06
#define REG_FRF_MID 0x07
#define REG_FRF_LSB 0x08
#define REG_PA_CONFIG 0x09
#define REG_OCP 0x0b
#define REG_LNA 0x0c
#define REG_FIFO_ADDR_PTR 0x0d
#define REG_FIFO_TX_BASE_ADDR 0x0e
#define REG_FIFO_RX_BASE_ADDR 0x0f
#define REG_FIFO_RX_CURRENT_ADDR 0x10
#define REG_IRQ_FLAGS 0x12
#define REG_RX_NB_BYTES 0x13
#define REG_PKT_SNR_VALUE 0x19
#define REG_PKT_RSSI_VALUE 0x1a
#define REG_MODEM_CONFIG_1 0x1d
#define REG_MODEM_CONFIG_2 0x1e
#define REG_PREAMBLE_MSB 0x20
#define REG_PREAMBLE_LSB 0x21
#define REG_PAYLOAD_LENGTH 0x22
#define REG_MODEM_CONFIG_3 0x26
#define REG_FREQ_ERROR_MSB 0x28
#define REG_FREQ_ERROR_MID 0x29
#define REG_FREQ_ERROR_LSB 0x2a
#define REG_RSSI_WIDEBAND 0x2c
#define REG_DETECTION_OPTIMIZE 0x31
#define REG_INVERTIQ 0x33
#define REG_DETECTION_THRESHOLD 0x37
#define REG_SYNC_WORD 0x39
#define REG_INVERTIQ2 0x3b
#define REG_DIO_MAPPING_1 0x40
#define REG_VERSION 0x42
#define REG_PA_DAC 0x4d
// modes
#define MODE_LONG_RANGE_MODE 0x80
#define MODE_SLEEP 0x00
#define MODE_STDBY 0x01
#define MODE_TX 0x03
#define MODE_RX_CONTINUOUS 0x05
#define MODE_RX_SINGLE 0x06
#define CONFIG2_CRC 0x04
#define CONFIG3_AUTO_AGC 0x04
// PA config
#define PA_BOOST 0x80
// IRQ masks
#define IRQ_TX_DONE_MASK 0x08
#define IRQ_PAYLOAD_CRC_ERROR_MASK 0x20
#define IRQ_RX_DONE_MASK 0x40
#ifdef NODEBUG
#define SX127X_CHECK(check, str, ret_val, ...) \
if (!(check)) { \
ESP_LOGE(TAG, "%s(%d): " str, __FUNCTION__, __LINE__, ##__VA_ARGS__); \
return (ret_val); \
}
#define SX127X_ERROR_CHECK(ret) \
{ \
esp_err_t _error_code = (ret); \
if (_error_code != ESP_OK) { \
return _error_code; \
} \
}
#define SX127X_ERROR_CHECK2(ret, fun) SX127X_CHECK(ret)
#else
#define SX127X_CHECK(check, str, ret_val, ...) \
if (!(check)) { \
ESP_LOGE(TAG, "%s(%d): " #check ": " str, __FUNCTION__, __LINE__, ##__VA_ARGS__); \
return (ret_val); \
}
#define SX127X_ERROR_CHECK(ret) \
{ \
esp_err_t _error_code = (ret); \
if (_error_code != ESP_OK) { \
const char *_error_name = esp_err_to_name(_error_code); \
ESP_LOGE(TAG, "%s(%d): %s (%d)", __FUNCTION__, __LINE__, _error_name, _error_code); \
return _error_code; \
} \
}
#define SX127X_ERROR_CHECK2(ret, fun) \
{ \
esp_err_t _error_code = (ret); \
if (_error_code != ESP_OK) { \
const char *_error_name = esp_err_to_name(_error_code); \
ESP_LOGE(TAG, "%s(%d): " #fun ": %s (%d)", __FUNCTION__, __LINE__, _error_name, _error_code); \
return _error_code; \
} \
}
#endif
struct sx127x {
sx127x_config_t config;
spi_device_handle_t device_handle;
TaskHandle_t task_handle;
bool task_running;
};
static esp_err_t sx127x_read_register(sx127x_t *handle, uint8_t reg, uint8_t *value);
static esp_err_t sx127x_write_register(sx127x_t *handle, uint8_t reg, uint8_t value);
static esp_err_t sx127x_single_transfer(sx127x_t *handle, uint8_t addr, uint8_t to_slave, uint8_t *from_slave);
static uint8_t sx127x_bw_to_reg(uint64_t bandwidth);
static uint64_t sx127x_reg_to_bw(uint8_t bandwidth_reg);
esp_err_t sx127x_init(sx127x_config_t *config, sx127x_t **handle_ptr) {
esp_err_t ret;
sx127x_t *handle = malloc(sizeof(sx127x_t));
SX127X_CHECK(handle != NULL, "malloc error", ESP_ERR_NO_MEM);
handle->task_handle = NULL;
memcpy(&handle->config, config, sizeof(sx127x_config_t));
ret = gpio_set_direction(config->rst_io_num, GPIO_MODE_OUTPUT);
SX127X_ERROR_CHECK2(ret, gpio_set_direction)
// perform reset
gpio_set_level(config->rst_io_num, 0);
vTaskDelay(RESET_DELAY);
gpio_set_level(config->rst_io_num, 1);
vTaskDelay(RESET_DELAY);
spi_bus_config_t bus_config = {.mosi_io_num = config->mosi_io_num,
.miso_io_num = config->miso_io_num,
.sclk_io_num = config->sck_io_num,
.quadhd_io_num = -1,
.quadwp_io_num = -1,
.max_transfer_sz = SX127X_MAX_TRANSFER};
ret = spi_bus_initialize(config->spi_host, &bus_config, 1);
SX127X_ERROR_CHECK2(ret, spi_bus_initialize)
spi_device_interface_config_t device_config = {
.command_bits = 0,
.address_bits = 8,
.dummy_bits = 0,
.mode = 0,
.duty_cycle_pos = 0,
.cs_ena_pretrans = 0,
.cs_ena_posttrans = 0,
.clock_speed_hz = SPI_CLOCK_HZ, // 8mhz
.input_delay_ns = 0,
.spics_io_num = config->cs_io_num,
.flags = 0,
.queue_size = 8,
.pre_cb = NULL,
.post_cb = NULL,
};
ret = spi_bus_add_device(config->spi_host, &device_config, &handle->device_handle);
SX127X_ERROR_CHECK2(ret, spi_bus_add_device)
// read version and check that it is compatible
uint8_t version;
ret = sx127x_read_register(handle, REG_VERSION, &version);
SX127X_ERROR_CHECK2(ret, sx127x_read_register);
SX127X_CHECK(version == 0x12, "unsupported version %#x", ESP_ERR_INVALID_VERSION, version);
ret = sx127x_sleep(handle);
SX127X_ERROR_CHECK(ret);
ret = sx127x_set_frequency(handle, config->frequency);
SX127X_ERROR_CHECK(ret);
ret = sx127x_write_register(handle, REG_FIFO_TX_BASE_ADDR, 0);
SX127X_ERROR_CHECK(ret);
sx127x_write_register(handle, REG_FIFO_RX_BASE_ADDR, 0);
SX127X_ERROR_CHECK(ret);
uint8_t reg_lna;
ret = sx127x_read_register(handle, REG_LNA, &reg_lna);
SX127X_ERROR_CHECK(ret);
reg_lna |= 0x03; // set LNA boost
ret = sx127x_write_register(handle, REG_LNA, reg_lna);
SX127X_ERROR_CHECK(ret);
// set auto AGC
ret = sx127x_write_register(handle, REG_MODEM_CONFIG_3, CONFIG3_AUTO_AGC);
SX127X_ERROR_CHECK(ret);
ret = sx127x_set_tx_power(handle, config->tx_power, true);
SX127X_ERROR_CHECK(ret);
ret = sx127x_set_spreading_factor(handle, config->spreading_factor);
SX127X_ERROR_CHECK(ret);
ret = sx127x_set_sync_word(handle, config->sync_word);
SX127X_ERROR_CHECK(ret);
ret = sx127x_set_crc(handle, config->crc);
SX127X_ERROR_CHECK(ret);
ret = sx127x_standby(handle);
ESP_ERROR_CHECK(ret);
*handle_ptr = handle;
return ESP_OK;
}
esp_err_t sx127x_free(sx127x_t *handle) {
esp_err_t ret;
if (handle->task_handle) {
ret = sx127x_stop(handle);
SX127X_ERROR_CHECK(ret);
}
ret = spi_bus_remove_device(handle->device_handle);
SX127X_ERROR_CHECK2(ret, spi_bus_remove_device)
ret = spi_bus_free(handle->config.spi_host);
SX127X_ERROR_CHECK2(ret, spi_bus_free)
free(handle);
return ESP_OK;
}
static esp_err_t sx127x_read_register(sx127x_t *handle, uint8_t reg, uint8_t *value) {
return sx127x_single_transfer(handle, reg & 0x7f, 0x00, value);
}
static esp_err_t sx127x_write_register(sx127x_t *handle, uint8_t reg, uint8_t value) {
return sx127x_single_transfer(handle, reg | 0x80, value, NULL);
}
static esp_err_t sx127x_single_transfer(sx127x_t *handle, uint8_t addr, uint8_t to_slave, uint8_t *from_slave) {
spi_transaction_t trans;
memset(&trans, 0, sizeof(trans));
trans.flags = SPI_TRANS_USE_RXDATA | SPI_TRANS_USE_TXDATA;
trans.addr = addr;
trans.length = 8;
trans.rxlength = 8;
trans.tx_data[0] = to_slave;
esp_err_t ret = spi_device_transmit(handle->device_handle, &trans);
SX127X_ERROR_CHECK2(ret, spi_device_transmit);
if (from_slave) {
*from_slave = trans.rx_data[0];
}
ESP_LOGV(TAG, "sx127x_single_transfer(%#x, %#x, %#x)", addr, trans.tx_data[0], trans.rx_data[0]);
return ESP_OK;
}
esp_err_t sx127x_sleep(sx127x_t *handle) {
return sx127x_write_register(handle, REG_OP_MODE, MODE_LONG_RANGE_MODE | MODE_SLEEP);
}
esp_err_t sx127x_standby(sx127x_t *handle) {
return sx127x_write_register(handle, REG_OP_MODE, MODE_LONG_RANGE_MODE | MODE_STDBY);
}
esp_err_t sx127x_set_frequency(sx127x_t *handle, uint64_t frequency) {
uint64_t frf = ((uint64_t)frequency << 19) / 32000000;
esp_err_t ret;
ret = sx127x_write_register(handle, REG_FRF_MSB, (uint8_t)(frf));
SX127X_ERROR_CHECK(ret);
frf >>= 8;
ret = sx127x_write_register(handle, REG_FRF_MID, (uint8_t)(frf));
SX127X_ERROR_CHECK(ret);
frf >>= 8;
ret = sx127x_write_register(handle, REG_FRF_LSB, (uint8_t)(frf));
SX127X_ERROR_CHECK(ret);
handle->config.frequency = frequency;
return ESP_OK;
}
esp_err_t sx127x_set_tx_power(sx127x_t *handle, uint8_t tx_power, sx127x_pa_boost_t pa_boost) {
esp_err_t ret;
if (pa_boost == SX127X_PA_BOOST_ENABLED) {
// PA BOOST
SX127X_CHECK(tx_power >= 2 && tx_power <= 20, "invalid tx_power: %d", ESP_ERR_INVALID_ARG, tx_power);
ret = sx127x_write_register(handle, REG_PA_CONFIG, PA_BOOST | (tx_power - 2));
} else {
// RFO
SX127X_CHECK(tx_power <= 14, "invalid tx_power: %d", ESP_ERR_INVALID_ARG, tx_power);
ret = sx127x_write_register(handle, REG_PA_CONFIG, 0x70 | tx_power);
}
SX127X_ERROR_CHECK(ret);
handle->config.tx_power = tx_power;
return ESP_OK;
}
esp_err_t sx127x_set_spreading_factor(sx127x_t *handle, uint8_t spreading_factor) {
SX127X_CHECK(spreading_factor >= 6 && spreading_factor <= 12, "invalid spreading_factor", ESP_ERR_INVALID_ARG);
// section 4.1.1.2 in SX1276 datasheet
uint8_t detection_optimize, detection_threshold;
if (spreading_factor == 6) {
detection_optimize = 0xc5;
detection_threshold = 0x0c;
} else {
detection_optimize = 0xc3;
detection_threshold = 0x0a;
}
SX127X_ERROR_CHECK(sx127x_write_register(handle, REG_DETECTION_OPTIMIZE, detection_optimize));
SX127X_ERROR_CHECK(sx127x_write_register(handle, REG_DETECTION_THRESHOLD, detection_threshold));
uint8_t modem_config_3;
SX127X_ERROR_CHECK(sx127x_read_register(handle, REG_MODEM_CONFIG_3, &modem_config_3));
modem_config_3 = (modem_config_3 & 0x03) | ((spreading_factor << 4) & 0xf0);
SX127X_ERROR_CHECK(sx127x_write_register(handle, REG_MODEM_CONFIG_3, modem_config_3));
handle->config.spreading_factor = spreading_factor;
return ESP_OK;
}
esp_err_t sx127x_set_signal_bandwidth(sx127x_t *handle, uint64_t signal_bandwidth) {
uint8_t bw_reg = sx127x_bw_to_reg(signal_bandwidth);
uint8_t modem_config_1;
SX127X_ERROR_CHECK(sx127x_read_register(handle, REG_MODEM_CONFIG_1, &modem_config_1));
modem_config_1 = (modem_config_1 & 0x0f) | (bw_reg << 4);
SX127X_ERROR_CHECK(sx127x_write_register(handle, REG_MODEM_CONFIG_1, modem_config_1));
handle->config.signal_bandwidth = signal_bandwidth;
// set low data rate optimization flag
uint64_t bw = sx127x_reg_to_bw(bw_reg);
uint8_t sf = handle->config.spreading_factor;
// section 4.1.1.5
uint64_t symbol_duration_ms = 1000 / (bw / (1L << sf));
// section 4.1.1.6
bool must_have_ldo = (symbol_duration_ms > 16);
bool ldo = must_have_ldo || (handle->config.ldo == SX127X_LDO_ENABLED);
uint8_t modem_config_3;
SX127X_ERROR_CHECK(sx127x_read_register(handle, REG_MODEM_CONFIG_3, &modem_config_3));
if (ldo) {
modem_config_3 |= (1 << 3);
} else {
modem_config_3 &= ~(1 << 3);
}
SX127X_ERROR_CHECK(sx127x_write_register(handle, REG_MODEM_CONFIG_3, modem_config_3));
return ESP_OK;
}
static uint8_t sx127x_bw_to_reg(uint64_t bandwidth) {
if (bandwidth <= 7.8E3) {
return 0;
} else if (bandwidth <= 10.4E3) {
return 1;
} else if (bandwidth <= 15.6E3) {
return 2;
} else if (bandwidth <= 20.8E3) {
return 3;
} else if (bandwidth <= 31.25E3) {
return 4;
} else if (bandwidth <= 41.7E3) {
return 5;
} else if (bandwidth <= 62.5E3) {
return 6;
} else if (bandwidth <= 125E3) {
return 7;
} else if (bandwidth <= 250E3) {
return 8;
} else /* if (bandwidth <= 500E3) */ {
return 9;
}
}
static uint64_t sx127x_reg_to_bw(uint8_t bandwidth_reg) {
switch (bandwidth_reg) {
case 0: return 7.8E3;
case 1: return 10.4E3;
case 2: return 15.6E3;
case 3: return 20.8E3;
case 4: return 31.25E3;
case 5: return 41.7E3;
case 6: return 62.5E3;
case 7: return 125E3;
case 8: return 250E3;
default:
case 9: return 500E3;
}
}
esp_err_t sx127x_set_sync_word(sx127x_t *handle, uint8_t sync_word) {
SX127X_ERROR_CHECK(sx127x_write_register(handle, REG_SYNC_WORD, sync_word));
handle->config.sync_word = sync_word;
return ESP_OK;
}
esp_err_t sx127x_set_crc(sx127x_t *handle, sx127x_crc_t crc) {
uint8_t modem_config_2;
SX127X_ERROR_CHECK(sx127x_read_register(handle, REG_MODEM_CONFIG_2, &modem_config_2));
if (crc == SX127X_CRC_ENABLED) {
modem_config_2 |= CONFIG2_CRC;
} else {
modem_config_2 &= ~CONFIG2_CRC;
}
SX127X_ERROR_CHECK(sx127x_write_register(handle, REG_MODEM_CONFIG_2, modem_config_2));
handle->config.crc = crc;
return ESP_OK;
}
void sx127x_isr(void *arg) {
sx127x_t *handle = (sx127x_t *)arg;
ESP_LOGI(TAG, "sx127x_isr");
}
void sx127x_task(void *arg) {
sx127x_t *handle = (sx127x_t *)arg;
while (handle->task_running) {
vTaskDelay(pdMS_TO_TICKS(10));
}
}
esp_err_t sx127x_start(sx127x_t *handle) {
esp_err_t ret;
SX127X_CHECK(handle->task_handle == NULL, "task already running", ESP_ERR_INVALID_STATE);
ret = sx127x_write_register(handle, REG_DIO_MAPPING_1, 0x00);
SX127X_ERROR_CHECK(ret);
gpio_config_t irq_io_config;
irq_io_config.intr_type = GPIO_INTR_POSEDGE;
irq_io_config.mode = GPIO_MODE_INPUT;
irq_io_config.pin_bit_mask = (1ULL << handle->config.irq_io_num);
irq_io_config.pull_down_en = 0;
irq_io_config.pull_up_en = 0;
ret = gpio_config(&irq_io_config);
SX127X_ERROR_CHECK2(ret, gpio_config)
ret = gpio_install_isr_service(ESP_INTR_FLAG_LEVEL1);
SX127X_ERROR_CHECK2(ret, gpio_install_isr_service);
ret = gpio_isr_handler_add(handle->config.irq_io_num, sx127x_isr, (void *)handle);
SX127X_ERROR_CHECK2(ret, gpio_isr_handler_add);
handle->task_running = true;
BaseType_t pdRet =
xTaskCreate(sx127x_task, "sx127x_task", TASK_STACK_SIZE, (void *)handle, TASK_PRIORITY, &handle->task_handle);
SX127X_CHECK(pdRet == pdPASS, "failed to create task", ESP_FAIL);
return ESP_OK;
}
esp_err_t sx127x_stop(sx127x_t *handle) {
esp_err_t ret;
SX127X_CHECK(handle->task_handle != NULL, "task has not been started", ESP_ERR_INVALID_STATE);
handle->task_running = false;
xTaskNotify(handle->task_handle, 0, eNoAction);
ret = gpio_isr_handler_remove(handle->config.irq_io_num);
SX127X_ERROR_CHECK2(ret, gpio_isr_handler_remove);
gpio_uninstall_isr_service();
return ESP_OK;
}
Write Preview
Loading…
Cancel
Save