/*
generate and update c/c++ files
this also replaces the buildcpp tool
Dec 2018:
There are now two SSD13xx cad procedures:
u8x8_cad_ssd13xx_i2c Put a I2C start/stop around each command and each argument --> many start/stop commands
u8x8_cad_ssd13xx_fast_i2c Put a I2C start/stop around each command+arg sequence --> start/stop is probably halfed --> 4% faster
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <error.h>
#include <ctype.h>
#include <unistd.h>
/*===========================================*/
/* ll_hvline */
#define U8X8_HVLINE "u8g2_ll_hvline_vertical_top_lsb"
#define COM_4WSPI 0x0001
#define COM_3WSPI 0x0002
#define COM_6800 0x0004
#define COM_8080 0x0008
#define COM_I2C 0x0010
#define COM_ST7920SPI 0x0020 /* mostly identical to COM_4WSPI, but does not use DC */
#define COM_UART 0x0040
#define COM_KS0108 0x0080 /* mostly identical to 6800 mode, but has more chip select lines */
#define COM_SED1520 0x0100
struct interface
{
const char *interface_name; /* SW_SPI */
const char *setpin_function; /* u8x8_SetPin_4Wire_SW_SPI */
const char *arduino_com_procedure; /* u8x8_byte_4wire_sw_spi */
const char *arduino_gpio_procedure; /* u8x8_gpio_and_delay_arduino */
const char *pins_with_type; /* uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE */
const char *pins_plain; /* clock, data, cs, dc, reset */
const char *pins_md_plain; /* clock, data, cs, dc, reset */
const char *generic_com_procedure; /* u8x8_byte_4wire_sw_spi, this is used for documentation, so it suould be generic for all uC architectures */
};
struct display
{
/* this name must match the display part of the device procedure */
/* u8x8_d_<controller>_<display> */
const char *name;
};
struct controller
{
/* the name must match the controller part of the device procedure */
/* u8x8_d_<controller>_<display> */
const char *name;
int tile_width;
int tile_height;
const char *ll_hvline;
const char *cad;
const char *cad_shortname;
unsigned com;
char *note;
unsigned is_generate_u8g2_class; /* currently not used, instead conrolled by COM_UART */
struct display display_list[10]; /* usually not used completly, but space does not matter much here */
};
/* issue #649 */
/* display_controller_list_start */
struct controller controller_list[] =
{
{
"ssd1305", 16, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x32_noname" },
{ "128x32_adafruit" },
{ NULL }
}
},
{
"ssd1305", 16, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x32_noname" },
{ "128x32_adafruit" },
{ NULL }
}
},
{
"ssd1305", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x64_adafruit" },
{ NULL }
}
},
{
"ssd1305", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x64_adafruit" },
{ NULL }
}
},
{
"ssd1306", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x64_noname" },
{ "128x64_vcomh0" },
{ "128x64_alt0" },
{ NULL }
}
},
{
"ssd1306", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_fast_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x64_noname" },
{ "128x64_vcomh0" },
{ "128x64_alt0" },
{ NULL }
}
},
{
"sh1106", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080|COM_8080,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "128x64_noname" },
{ "128x64_vcomh0" },
{ "128x64_winstar" },
{ NULL }
}
},
{
"sh1106", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "128x64_noname" },
{ "128x64_vcomh0" },
{ "128x64_winstar" },
{ NULL }
}
},
{
"sh1106", 9, 5, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080|COM_8080,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "72x40_wise" },
{ NULL }
}
},
{
"sh1106", 9, 5, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "72x40_wise" },
{ NULL }
}
},
{
"sh1106", 8, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080|COM_8080,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "64x32" },
{ NULL }
}
},
{
"sh1106", 8, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "64x32" },
{ NULL }
}
},
{
"sh1107", 8, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080|COM_8080,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "64x128" },
{ NULL }
}
},
{
"sh1107", 8, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "64x128" },
{ NULL }
}
},
{
"sh1107", 12, 12, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080|COM_8080,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "seeed_96x96" },
{ NULL }
}
},
{
"sh1107", 12, 12, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "seeed_96x96" },
{ NULL }
}
},
{
"sh1107", 16, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080|COM_8080,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "128x128" },
{ NULL }
}
},
{
"sh1107", 16, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "128x128" },
{ NULL }
}
},
{
"sh1108", 20, 20, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080|COM_8080,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "160x160" },
{ NULL }
}
},
{
"sh1108", 20, 20, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "160x160" },
{ NULL }
}
},
{
"sh1122", 32, 8, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "256x64" },
{ NULL }
}
},
{
"sh1122", 32, 8, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "256x64" },
{ NULL }
}
},
{
"ssd1306", 16, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x32_univision" },
{ NULL }
}
},
{
"ssd1306", 16, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_fast_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x32_univision" },
{ NULL }
}
},
{
"ssd1306", 8, 6, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "64x48_er" },
{ NULL }
}
},
{
"ssd1306", 8, 6, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_fast_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "64x48_er" },
{ NULL }
}
},
{
"ssd1306", 6, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "48x64_winstar" },
{ NULL }
}
},
{
"ssd1306", 6, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_fast_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "48x64_winstar" },
{ NULL }
}
},
{
"ssd1306", 8, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "64x32_noname" },
{ "64x32_1f" },
{ NULL }
}
},
{
"ssd1306", 8, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_fast_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "64x32_noname" },
{ "64x32_1f" },
{ NULL }
}
},
{
"ssd1306", 12, 2, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "96x16_er" },
{ NULL }
}
},
{
"ssd1306", 12, 2, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_fast_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "96x16_er" },
{ NULL }
}
},
{
"ssd1309", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x64_noname2" },
{ NULL }
}
},
{
"ssd1309", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x64_noname2" },
{ NULL }
}
},
{
"ssd1309", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x64_noname0" },
{ NULL }
}
},
{
"ssd1309", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x64_noname0" },
{ NULL }
}
},
{
"ssd1317", 12, 12, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "96x96" },
{ NULL }
}
},
{
"ssd1317", 12, 12, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "96x96" },
{ NULL }
}
},
{
"ssd1325", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "nhd_128x64" },
{ NULL }
}
},
{
"ssd1325", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "nhd_128x64" },
{ NULL }
}
},
{
"ssd0323", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "os128064" },
{ NULL }
}
},
{
"ssd0323", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "os128064" },
{ NULL }
}
},
{
"ssd1326", 32, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "er_256x32" },
{ NULL }
}
},
{
"ssd1326", 32, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "er_256x32" },
{ NULL }
}
},
{
"ssd1327", 12, 12, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "seeed_96x96" },
{ NULL }
}
},
{
"ssd1327", 12, 12, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "seeed_96x96" },
{ NULL }
}
},
{
"ssd1327", 16, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "ea_w128128" },
{ "midas_128x128" },
{ NULL }
}
},
{
"ssd1327", 16, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "ea_w128128" },
{ "midas_128x128" },
{ NULL }
}
},
{
"ssd1329", 16, 12, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x96_noname" },
{ NULL }
}
},
{
"ld7032", 8, 4, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_011", "", COM_4WSPI,
"", /* is_generate_u8g2_class= */ 1,
{
{ "60x32" },
{ NULL }
}
},
{
"ld7032", 8, 4, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_ld7032_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "60x32" },
{ NULL }
}
},
{
"st7920", 24, 4, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_001", "p", COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "192x32" },
{ NULL }
}
},
{
"st7920", 24, 4, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_001", "", COM_6800,
"", /* is_generate_u8g2_class= */ 1,
{
{ "192x32" },
{ NULL }
}
},
{
"st7920", 24, 4, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_st7920_spi", "s", COM_ST7920SPI,
"", /* is_generate_u8g2_class= */ 1,
{
{ "192x32" },
{ NULL }
}
},
{
"st7920", 16, 8, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_001", "p", COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x64" },
{ NULL }
}
},
{
"st7920", 16, 8, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_001", "", COM_6800,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x64" },
{ NULL }
}
},
{
"st7920", 16, 8, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_st7920_spi", "s", COM_ST7920SPI,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x64" },
{ NULL }
}
},
{
"ls013b7dh03", 16, 16, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_001", "", COM_4WSPI, /* cad procedure is not required (no DC for this display) so it could be a dummy procedure here */
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x128" },
{ NULL }
}
},
{
"ls027b7dh01", 50, 30, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_001", "", COM_4WSPI, /* cad procedure is not required (no DC for this display) so it could be a dummy procedure here */
"", /* is_generate_u8g2_class= */ 1,
{
{ "400x240" },
{ NULL }
}
},
{
"ls013b7dh05", 18, 21, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_001", "", COM_4WSPI, /* cad procedure is not required (no DC for this display) so it could be a dummy procedure here */
"", /* is_generate_u8g2_class= */ 1,
{
{ "144x168" },
{ NULL }
}
},
{
"uc1701", 13, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "ea_dogs102" },
{ NULL }
}
},
{
"uc1701", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "mini12864" },
{ NULL }
}
},
{
"pcd8544", 11, 6, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI,
"No HW flip", /* is_generate_u8g2_class= */ 1,
{
{ "84x48" },
{ NULL }
}
},
{
"pcf8812", 12, 9, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI,
"No HW flip", /* is_generate_u8g2_class= */ 1,
{
{ "96x65" },
{ NULL }
}
},
{
"hx1230", 12, 9, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI,
"No HW flip", /* is_generate_u8g2_class= */ 1,
{
{ "96x68" },
{ NULL }
}
},
{
"uc1604", 24, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx19264" },
{ NULL }
}
},
{
"uc1604", 24, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_uc16xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx19264" },
{ NULL }
}
},
{
"uc1608", 30, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "erc24064" },
{ NULL }
}
},
{
"uc1608", 30, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_uc16xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "erc24064" },
{ NULL }
}
},
{
"uc1608", 30, 15, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "erc240120" },
{ NULL }
}
},
{
"uc1608", 30, 15, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_uc16xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "erc240120" },
{ NULL }
}
},
{
"uc1608", 30, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "240x128" },
{ NULL }
}
},
{
"uc1608", 30, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_uc16xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "240x128" },
{ NULL }
}
},
{
"uc1638", 20, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_011", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "160x128" },
{ NULL }
}
},
//{
/* this device requires cd=1 for arguments, not clear whether the u8x8_cad_uc16xx_i2c works */
//"uc1638", 20, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_uc16xx_i2c", "i2c", COM_I2C,
//"", /* is_generate_u8g2_class= */ 1,
//{
// { "160x128" },
// { NULL }
//}
//},
{
"uc1610", 20, 13, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"3W SPI not tested", /* is_generate_u8g2_class= */ 1,
{
{ "ea_dogxl160" },
{ NULL }
}
},
{
"uc1610", 20, 13, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_uc16xx_i2c", "i2c", COM_I2C,
"3W SPI not tested, I2C not tested", /* is_generate_u8g2_class= */ 1,
{
{ "ea_dogxl160" },
{ NULL }
}
},
{
"uc1611", 30, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "ea_dogm240" },
{ NULL }
}
},
{
"uc1611", 30, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_uc16xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "ea_dogm240" },
{ NULL }
}
},
{
"uc1611", 30, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "ea_dogxl240" },
{ NULL }
}
},
{
"uc1611", 30, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_uc16xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "ea_dogxl240" },
{ NULL }
}
},
{
"uc1611", 30, 20, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"240x160, active high chip select", /* is_generate_u8g2_class= */ 1,
{
{ "ew50850" }, /* 240x160 */
{ NULL }
}
},
{
"uc1611", 30, 20, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_uc16xx_i2c", "i2c", COM_I2C,
"240x160, active high chip select", /* is_generate_u8g2_class= */ 1,
{
{ "ew50850" }, /* 240x160 */
{ NULL }
}
},
#ifdef NOTUSED
{
"uc1617", 16, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx128128" },
{ NULL }
}
},
{
"uc1617", 16, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_uc16xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx128128" },
{ NULL }
}
},
#endif
{
"st7565", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "ea_dogm128" },
{ "64128n" },
{ "zolen_128x64" },
{ "lm6059" },
{ "lx12864" },
{ "erc12864" },
{ "nhd_c12864" },
{ "jlx12864" },
{ NULL }
},
},
{
"st7565", 16, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "nhd_c12832" },
{ NULL }
}
},
{
"uc1601", 16, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x32" },
{ NULL }
}
},
{
"uc1601", 16, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_uc16xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x32" },
{ NULL }
}
},
{
"st7565", 17, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "ea_dogm132" },
{ NULL }
}
},
{
"st7567", 17, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "pi_132x64" },
{ NULL }
}
},
{
"st7567", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx12864" },
{ "enh_dg128064" },
{ "enh_dg128064i" },
{ NULL }
}
},
{
"st7567", 8, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "64x32" },
{ NULL }
}
},
{
"st7567", 8, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "64x32" },
{ NULL }
}
},
{
"st7586s", 48, 17, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_011", "", COM_4WSPI,
"", /* is_generate_u8g2_class= */ 1,
{
{ "s028hn118a" },
{ NULL }
},
},
{
"st7586s", 30, 20, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_011", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "erc240160" },
{ NULL }
},
},
{
"st7588", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx12864" },
{ NULL }
},
},
{ /* the ST7588 has the same I2C protocol as the SSD13xx */
"st7588", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx12864" },
{ NULL }
}
},
{
"st75256", 32, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_011", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx256128" },
{ NULL }
},
},
/* the ST75256 has the same I2C protocol as the SSD13xx, BUT: for arguments have the data bit set!!!! */
/* this means, we need to implement a u8x8_cad_ssd13xx_i2c procedure with cad 011 functionality */
/* done: u8x8_cad_st75256_i2c */
{
"st75256", 32, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_st75256_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx256128" },
{ NULL }
}
},
{
"st75256", 32, 20, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_011", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx256160" },
{ "jlx256160_alt" },
{ NULL }
},
},
/* the ST75256 has the same I2C protocol as the SSD13xx, BUT: for arguments have the data bit set!!!! */
/* this means, we need to implement a u8x8_cad_ssd13xx_i2c procedure with cad 011 functionality */
/* done: u8x8_cad_st75256_i2c */
{
"st75256", 32, 20, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_st75256_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx256160" },
{ NULL }
}
},
{
"st75256", 30, 20, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_011", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx240160" },
{ NULL }
},
},
{
"st75256", 30, 20, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_st75256_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx240160" },
{ NULL }
}
},
{
"st75256", 32, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_011", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx25664" },
{ NULL }
},
},
{
"st75256", 32, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_st75256_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx25664" },
{ NULL }
}
},
{
"st75256", 22, 13, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_011", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx172104" },
{ NULL }
},
},
{
"st75256", 22, 13, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_st75256_i2c", "i2c", COM_I2C,
"", /* is_generate_u8g2_class= */ 1,
{
{ "jlx172104" },
{ NULL }
},
},
{
"nt7534", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "tg12864r" },
{ NULL }
}
},
{
"ist3020", 24, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "erc19264" },
{ NULL }
}
},
{
"sbn1661", 16, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_SED1520,
"", /* is_generate_u8g2_class= */ 1,
{
{ "122x32" },
{ NULL }
},
},
{
"sed1520", 16, 4, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_SED1520,
"", /* is_generate_u8g2_class= */ 1,
{
{ "122x32" },
{ NULL }
},
},
{
"ks0108", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_KS0108,
"", /* is_generate_u8g2_class= */ 1,
{
{ "128x64" },
{ NULL }
},
},
{
"ks0108", 24, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_KS0108,
"", /* is_generate_u8g2_class= */ 1,
{
{ "erm19264" },
{ NULL }
},
},
{
"lc7981", 20, 10, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_100", "", COM_6800,
"U8x8 not supported, no powerdown, no HW flip, no constrast", /* is_generate_u8g2_class= */ 1,
{
{ "160x80" },
{ NULL }
}
},
{
"lc7981", 20, 20, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_100", "", COM_6800,
"U8x8 not supported, no powerdown, no HW flip, no constrast", /* is_generate_u8g2_class= */ 1,
{
{ "160x160" },
{ NULL }
}
},
{
"lc7981", 30, 16, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_100", "", COM_6800,
"U8x8 not supported, no powerdown, no HW flip, no constrast", /* is_generate_u8g2_class= */ 1,
{
{ "240x128" },
{ NULL }
}
},
{
"lc7981", 30, 8, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_100", "", COM_6800,
"U8x8 not supported, no powerdown, no HW flip, no constrast", /* is_generate_u8g2_class= */ 1,
{
{ "240x64" },
{ NULL }
}
},
{
"t6963", 30, 16, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_100", "", COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "240x128" },
{ NULL }
}
},
{
"t6963", 30, 8, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_100", "", COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "240x64" },
{ NULL }
}
},
{
"t6963", 32, 8, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_100", "", COM_8080,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "256x64" },
{ NULL }
}
},
{
"t6963", 16, 8, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_100", "", COM_8080,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "128x64" },
{ "128x64_alt" },
{ NULL }
}
},
{
"t6963", 20, 10, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_100", "", COM_8080,
"Not tested", /* is_generate_u8g2_class= */ 1,
{
{ "160x80" },
{ NULL }
}
},
{
"ssd1322", 32, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_011", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"Requires U8G2_16BIT (see u8g2.h)", /* is_generate_u8g2_class= */ 1,
{
{ "nhd_256x64" },
{ NULL }
}
},
{
"ssd1322", 16, 8, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_011", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
"", /* is_generate_u8g2_class= */ 1,
{
{ "nhd_128x64" },
{ NULL }
}
},
{
"ssd1606", 22, 9, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_011", "", COM_4WSPI|COM_3WSPI,
"Partly supported by U8x8, no HW flip, no contrast setting", /* is_generate_u8g2_class= */ 1,
{
{ "172x72" },
{ NULL }
}
},
{
"ssd1607", 25, 25, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_011", "", COM_4WSPI|COM_3WSPI,
"Partly supported by U8x8, no HW flip, no contrast setting, v2 includes an optimized LUT", /* is_generate_u8g2_class= */ 1,
{
{ "200x200" },
{ "gd_200x200" }, // GDEP015OC1
//{ "v2_200x200" },
{ NULL }
}
},
{
"il3820", 37, 16, "u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_011", "", COM_4WSPI|COM_3WSPI,
"Partly supported by U8x8, no HW flip, no contrast setting, V2 produces lesser screen-flicker", /* is_generate_u8g2_class= */ 1,
{
{ "296x128" },
{ "v2_296x128" },
{ NULL }
}
},
{
"sed1330", 30, 16, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_100", "", COM_6800|COM_8080,
"Not tested, might work for RA8835 and SED1335 also", /* is_generate_u8g2_class= */ 1,
{
{ "240x128" },
{ NULL }
}
},
{
"ra8835", 30, 16, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_100", "", COM_6800|COM_8080,
"Tested with RA8835", /* is_generate_u8g2_class= */ 1,
{
{ "nhd_240x128" },
{ NULL }
}
},
{
"ra8835", 40, 30, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_100", "", COM_6800|COM_8080,
"not tested", /* is_generate_u8g2_class= */ 1,
{
{ "320x240" },
{ NULL }
}
},
{
"max7219", 8, 1, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_empty", "", COM_4WSPI,
"", /* is_generate_u8g2_class= */ 1,
{
{ "64x8" },
{ NULL }
}
},
{
"max7219", 4, 1, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_empty", "", COM_4WSPI,
"", /* is_generate_u8g2_class= */ 1,
{
{ "32x8" },
{ NULL }
}
},
{
"max7219", 1, 1, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_empty", "", COM_4WSPI,
"", /* is_generate_u8g2_class= */ 1,
{
{ "8x8" },
{ NULL }
}
},
{
"a2printer", 48, 30, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_empty", "", COM_UART,
"", /* is_generate_u8g2_class= */ 0,
{
{ "384x240" },
{ NULL }
}
}
};
/* display_controller_list_end */
struct interface interface_list[] =
{
/* 0 */
{
"4W_SW_SPI",
"u8x8_SetPin_4Wire_SW_SPI",
"u8x8_byte_arduino_4wire_sw_spi", /* improved version over u8x8_byte_4wire_sw_spi */
"u8x8_gpio_and_delay_arduino",
"uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE",
"clock, data, cs, dc, reset",
"clock, data, cs, dc [, reset]",
"u8x8_byte_4wire_sw_spi"
},
/* 1 */
{
"4W_HW_SPI",
"u8x8_SetPin_4Wire_HW_SPI",
"u8x8_byte_arduino_hw_spi",
"u8x8_gpio_and_delay_arduino",
"uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE",
"cs, dc, reset",
"cs, dc [, reset]",
"uC specific"
},
/* 2 */
{
"6800",
"u8x8_SetPin_8Bit_6800",
"u8x8_byte_8bit_6800mode",
"u8x8_gpio_and_delay_arduino",
"uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE",
"d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset",
"d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc [, reset]",
"u8x8_byte_8bit_6800mode"
},
/* 3 */
{
"8080",
"u8x8_SetPin_8Bit_8080",
"u8x8_byte_arduino_8bit_8080mode",
"u8x8_gpio_and_delay_arduino",
"uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE",
"d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset",
"d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc [, reset]",
"u8x8_byte_8bit_8080mode"
},
/* 4 */
{
"3W_SW_SPI",
"u8x8_SetPin_3Wire_SW_SPI",
"u8x8_byte_arduino_3wire_sw_spi",
"u8x8_gpio_and_delay_arduino",
"uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE",
"clock, data, cs, reset",
"clock, data, cs [, reset]",
"u8x8_byte_3wire_sw_spi"
},
/* 5 */
{
"3W_HW_SPI",
"",
"",
"",
"uint8_t cs, uint8_t reset = U8X8_PIN_NONE",
"cs, reset",
"cs [, reset]",
"uC specific"
},
/* 6 */
{
"SW_I2C",
"u8x8_SetPin_SW_I2C",
"u8x8_byte_arduino_sw_i2c" /* u8x8_byte_sw_i2c */,
"u8x8_gpio_and_delay_arduino",
"uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE",
"clock, data, reset",
"clock, data [, reset]",
"u8x8_byte_sw_i2c" /* u8x8_byte_sw_i2c */
},
/* 7 */
{
"HW_I2C",
"u8x8_SetPin_HW_I2C",
"u8x8_byte_arduino_hw_i2c",
"u8x8_gpio_and_delay_arduino",
"uint8_t reset = U8X8_PIN_NONE, uint8_t clock = U8X8_PIN_NONE, uint8_t data = U8X8_PIN_NONE",
"reset, clock, data",
"[reset [, clock, data]]",
"uC specific"
},
/* 8 */
{
/* ST7920 */ "SW_SPI",
"u8x8_SetPin_3Wire_SW_SPI", /* use the 3 wire interface, because the DC is not used */
"u8x8_byte_arduino_4wire_sw_spi", /* improved version over u8x8_byte_4wire_sw_spi */
"u8x8_gpio_and_delay_arduino",
"uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE",
"clock, data, cs, reset",
"clock, data, cs [, reset]",
"u8x8_byte_4wire_sw_spi", /* "u8x8_byte_st7920_sw_spi" */
},
/* 9 */
{
/* ST7920 */ "HW_SPI",
"u8x8_SetPin_ST7920_HW_SPI",
"u8x8_byte_arduino_hw_spi",
"u8x8_gpio_and_delay_arduino",
"uint8_t cs, uint8_t reset = U8X8_PIN_NONE",
"cs, reset",
"cs [, reset]",
"uC specific"
},
/* 10 */
{
"2ND_HW_I2C",
"u8x8_SetPin_HW_I2C",
"u8x8_byte_arduino_2nd_hw_i2c",
"u8x8_gpio_and_delay_arduino",
"uint8_t reset = U8X8_PIN_NONE",
"reset",
"[reset]",
"uC specific"
},
/* 11 */
{
"",
"u8x8_SetPin_KS0108",
"u8x8_byte_arduino_ks0108",
"u8x8_gpio_and_delay_arduino",
"uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t dc, uint8_t cs0, uint8_t cs1, uint8_t cs2, uint8_t reset = U8X8_PIN_NONE",
"d0, d1, d2, d3, d4, d5, d6, d7, enable, dc, cs0, cs1, cs2, reset",
"d0, d1, d2, d3, d4, d5, d6, d7, enable, dc, cs0, cs1, cs2 [, reset]",
"u8x8_byte_ks0108"
},
/* 12 */
{
"2ND_4W_HW_SPI",
"u8x8_SetPin_4Wire_HW_SPI",
"u8x8_byte_arduino_2nd_hw_spi",
"u8x8_gpio_and_delay_arduino",
"uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE",
"cs, dc, reset",
"cs, dc [, reset]",
"uC specific"
},
/* 13 */
{
"",
"u8x8_SetPin_SED1520",
"u8x8_byte_sed1520",
"u8x8_gpio_and_delay_arduino",
"uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t dc, uint8_t e1, uint8_t e2, uint8_t reset",
"d0, d1, d2, d3, d4, d5, d6, d7, dc, e1, e2, reset",
"d0, d1, d2, d3, d4, d5, d6, d7, dc, e1, e2, reset",
"u8x8_byte_sed1520"
},
/* 14 */
{
/* ST7920 */ "2ND_HW_SPI",
"u8x8_SetPin_ST7920_HW_SPI",
"u8x8_byte_arduino_2nd_hw_spi",
"u8x8_gpio_and_delay_arduino",
"uint8_t cs, uint8_t reset = U8X8_PIN_NONE",
"cs, reset",
"cs [, reset]",
"uC specific"
},
};
/*===========================================*/
#define STR_MAX 1024
char *str_list[STR_MAX];
int str_cnt = 0;
int str_exists(const char *s)
{
int i;
for( i = 0; i < str_cnt; i++ )
{
if ( strcmp(str_list[i], s) == 0 )
return 1;
}
return 0;
}
void str_add(const char *s)
{
if ( str_exists(s) )
return;
if ( str_cnt >= STR_MAX )
{
error(1,0, "max number of strings reached");
}
else
{
str_list[str_cnt] = strdup(s);
str_cnt++;
}
}
/*===========================================*/
/*
copy file from source_file_name to dest_file_name
*/
int file_copy(const char *source_file_name, const char *dest_file_name)
{
int ch;
FILE *source_fp;
FILE *dest_fp;
source_fp = fopen(source_file_name, "r");
dest_fp = fopen(dest_file_name, "w");
if ( source_fp == NULL || dest_fp == NULL )
return 0;
while( ( ch = fgetc(source_fp) ) != EOF )
fputc(ch, dest_fp);
fclose(source_fp);
fclose(dest_fp);
return 1;
}
/*
Insert file "insertname" between lines "start_line" and "end_line" of file "filename"
*/
int insert_into_file(const char *filename, const char *insertname, const char *start_line, const char *end_line)
{
int ch;
static char line[1024*4];
const char *tmpname = "tmp.h";
FILE *source_fp;
FILE *dest_fp;
FILE *insert_fp;
if ( file_copy(filename, tmpname) == 0 )
return 0;
source_fp = fopen(tmpname, "r");
dest_fp = fopen(filename, "w");
insert_fp = fopen(insertname, "r");
if ( source_fp == NULL || dest_fp == NULL || insert_fp == NULL )
return 0;
for(;;)
{
if ( fgets(line, 1024*4, source_fp) == NULL )
break;
if ( strncmp(line, start_line, strlen(start_line)) == 0 )
{
fputs(line, dest_fp);
while( ( ch = fgetc(insert_fp) ) != EOF )
fputc(ch, dest_fp);
fputs("\n", dest_fp);
for(;;)
{
if ( fgets(line, 1024*4, source_fp) == NULL )
break;
if ( strncmp(line, end_line, strlen(end_line)) == 0 )
{
fputs(line, dest_fp);
break;
}
}
}
else
{
fputs(line, dest_fp);
}
}
fclose(insert_fp);
fclose(source_fp);
fclose(dest_fp);
unlink(tmpname);
printf("patched %s\n", filename);
return 1;
}
/*===========================================*/
char *strlowercase(const char *s)
{
int i, len = strlen(s);
static char buf[1024];
for( i = 0; i <= len; i++ )
buf[i] = tolower(s[i]);
return buf;
}
char *struppercase(const char *s)
{
int i, len = strlen(s);
static char buf[1024];
for( i = 0; i <= len; i++ )
buf[i] = toupper(s[i]);
return buf;
}
/*===========================================*/
FILE *buf_code_fp;
FILE *buf_header_fp;
FILE *setup_code_fp;
FILE *setup_header_fp;
FILE *u8g2_cpp_header_fp;
FILE *u8x8_cpp_header_fp;
FILE *u8x8_setup_c_md_fp;
FILE *u8x8_setup_cpp_md_fp;
FILE *u8g2_setup_c_md_fp;
FILE *u8g2_setup_cpp_md_fp;
const char *get_setup_function_name(int controller_idx, int display_idx, const char *postfix)
{
static char s[1024];
strcpy(s, "u8g2_Setup_");
strcat(s, strlowercase(controller_list[controller_idx].name));
strcat(s, "_");
if ( controller_list[controller_idx].cad_shortname[0] != '\0' )
{
strcat(s, strlowercase(controller_list[controller_idx].cad_shortname));
strcat(s, "_");
}
strcat(s, strlowercase(controller_list[controller_idx].display_list[display_idx].name));
strcat(s, "_");
strcat(s, postfix);
return s;
}
void do_setup_prototype(FILE *fp, int controller_idx, int display_idx, const char *postfix)
{
/*
fprintf(fp, "void u8g2_Setup_");
fprintf(fp, "%s_", strlowercase(controller_list[controller_idx].name));
fprintf(fp, "%s_", strlowercase(controller_list[controller_idx].display_list[display_idx].name));
fprintf(fp, "%s(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)", postfix);
*/
fprintf(fp, "void %s", get_setup_function_name(controller_idx, display_idx, postfix));
fprintf(fp, "(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)");
}
/*===========================================*/
/*
class U8X8_SSD1306_128X64_4W_SW_SPI : public U8X8 {
public: U8X8_SSD1306_128X64_4W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
u8x8_Setup(getU8x8(), u8x8_d_ssd1306_128x64_noname, u8x8_cad_001, u8x8_byte_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
}
}
*/
void do_u8x8_header(int controller_idx, int display_idx, int interface_idx)
{
FILE *fp = u8x8_cpp_header_fp;
fprintf(fp, "class U8X8_");
fprintf(fp, "%s_", struppercase(controller_list[controller_idx].name));
fprintf(fp, "%s", struppercase(controller_list[controller_idx].display_list[display_idx].name));
if ( interface_list[interface_idx].interface_name[0] != '\0' )
fprintf(fp, "_%s", struppercase(interface_list[interface_idx].interface_name));
fprintf(fp, " : public U8X8 {\n");
fprintf(fp, " public: ");
fprintf(fp, "U8X8_");
fprintf(fp, "%s_", struppercase(controller_list[controller_idx].name));
fprintf(fp, "%s", struppercase(controller_list[controller_idx].display_list[display_idx].name));
if ( interface_list[interface_idx].interface_name[0] != '\0' )
fprintf(fp, "_%s", struppercase(interface_list[interface_idx].interface_name));
fprintf(fp, "(%s) : U8X8() {\n", interface_list[interface_idx].pins_with_type);
fprintf(fp, " ");
fprintf(fp, "u8x8_Setup(getU8x8(), u8x8_d_");
fprintf(fp, "%s_", strlowercase(controller_list[controller_idx].name));
fprintf(fp, "%s, ", strlowercase(controller_list[controller_idx].display_list[display_idx].name));
fprintf(fp, "%s, ", strlowercase(controller_list[controller_idx].cad));
fprintf(fp, "%s, ", interface_list[interface_idx].arduino_com_procedure);
fprintf(fp, "%s);\n", interface_list[interface_idx].arduino_gpio_procedure);
fprintf(fp, " ");
fprintf(fp, "%s(getU8x8(), ", interface_list[interface_idx].setpin_function);
fprintf(fp, "%s);\n", interface_list[interface_idx].pins_plain);
fprintf(fp, " }\n");
fprintf(fp, "};\n");
}
/*
class U8G2_SSD1306_128x64_NONAME_1_SW_SPI : public U8G2
{
public:
U8G2_SSD1306_128x64_NONAME_1_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE)
{
u8g2_Setup_ssd1306_128x64_noname_1(&u8g2, rotation, u8x8_byte_4wire_sw_spi, u8x8_gpio_and_delay_arduino,);
u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
}
};
*/
void do_display_interface(int controller_idx, int display_idx, const char *postfix, int interface_idx)
{
FILE *fp = u8g2_cpp_header_fp;
printf(" %s %s", postfix, interface_list[interface_idx].interface_name);
fprintf(fp, "class U8G2_");
fprintf(fp, "%s_", struppercase(controller_list[controller_idx].name));
fprintf(fp, "%s_", struppercase(controller_list[controller_idx].display_list[display_idx].name));
fprintf(fp, "%s", struppercase(postfix));
if ( interface_list[interface_idx].interface_name[0] != '\0' )
fprintf(fp, "_%s", struppercase(interface_list[interface_idx].interface_name));
fprintf(fp, " : public U8G2 {\n");
fprintf(fp, " public: ");
fprintf(fp, "U8G2_");
fprintf(fp, "%s_", struppercase(controller_list[controller_idx].name));
fprintf(fp, "%s_", struppercase(controller_list[controller_idx].display_list[display_idx].name));
fprintf(fp, "%s", struppercase(postfix));
if ( interface_list[interface_idx].interface_name[0] != '\0' )
fprintf(fp, "_%s", struppercase(interface_list[interface_idx].interface_name));
fprintf(fp, "(const u8g2_cb_t *rotation, ");
fprintf(fp, "%s) : U8G2() {\n", interface_list[interface_idx].pins_with_type);
fprintf(fp, " ");
/*
fprintf(fp, "u8g2_Setup_");
fprintf(fp, "%s_", strlowercase(controller_list[controller_idx].name));
fprintf(fp, "%s_", strlowercase(controller_list[controller_idx].display_list[display_idx].name));
fprintf(fp, "%s", postfix);
*/
fprintf(fp, "%s", get_setup_function_name(controller_idx, display_idx, postfix));
fprintf(fp, "(&u8g2, ");
fprintf(fp, "rotation, ");
fprintf(fp, "%s, ", interface_list[interface_idx].arduino_com_procedure);
fprintf(fp, "%s);\n", interface_list[interface_idx].arduino_gpio_procedure);
fprintf(fp, " ");
fprintf(fp, "%s(getU8x8(), ", interface_list[interface_idx].setpin_function);
fprintf(fp, "%s);\n", interface_list[interface_idx].pins_plain);
fprintf(fp, " }\n");
fprintf(fp, "};\n");
if ( strcmp(postfix, "1") == 0 )
do_u8x8_header(controller_idx, display_idx, interface_idx);
}
/*===========================================*/
void do_display(int controller_idx, int display_idx, const char *postfix)
{
do_setup_prototype(setup_header_fp, controller_idx, display_idx, postfix);
fprintf(setup_header_fp, ";\n");
do_setup_prototype(setup_code_fp, controller_idx, display_idx, postfix);
fprintf(setup_code_fp, "\n");
fprintf(setup_code_fp, "{\n");
fprintf(setup_code_fp, " uint8_t tile_buf_height;\n");
fprintf(setup_code_fp, " uint8_t *buf;\n");
fprintf(setup_code_fp, " u8g2_SetupDisplay(u8g2, u8x8_d_");
fprintf(setup_code_fp, "%s_", strlowercase(controller_list[controller_idx].name));
fprintf(setup_code_fp, "%s, ", strlowercase(controller_list[controller_idx].display_list[display_idx].name));
fprintf(setup_code_fp, "%s, ", controller_list[controller_idx].cad);
fprintf(setup_code_fp, "byte_cb, gpio_and_delay_cb);\n");
fprintf(setup_code_fp, " buf = ");
//fprintf(setup_code_fp, "u8g2_m_%s_%d_%s(&tile_buf_height);\n", strlowercase(controller_list[controller_idx].name), controller_list[controller_idx].tile_width, postfix);
fprintf(setup_code_fp, "u8g2_m_%d_%d_%s(&tile_buf_height);\n", controller_list[controller_idx].tile_width, controller_list[controller_idx].tile_height, postfix);
fprintf(setup_code_fp, " u8g2_SetupBuffer(u8g2, buf, tile_buf_height, %s, rotation);\n", controller_list[controller_idx].ll_hvline);
fprintf(setup_code_fp, "}\n");
/* generate interfaces for this display */
if ( controller_list[controller_idx].com & COM_4WSPI )
{
do_display_interface(controller_idx, display_idx, postfix, 0); /* SW SPI */
do_display_interface(controller_idx, display_idx, postfix, 1); /* HW SPI */
do_display_interface(controller_idx, display_idx, postfix, 12); /* 2nd HW SPI */
}
if ( controller_list[controller_idx].com & COM_3WSPI )
{
do_display_interface(controller_idx, display_idx, postfix, 4); /* 3wire SW SPI */
//do_display_interface(controller_idx, display_idx, postfix, 5); /* 3wire HW SPI (not implemented) */
}
if ( controller_list[controller_idx].com & COM_6800 )
{
do_display_interface(controller_idx, display_idx, postfix, 2); /* 6800 mode */
}
if ( controller_list[controller_idx].com & COM_8080 )
{
do_display_interface(controller_idx, display_idx, postfix, 3); /* 8080 mode */
}
if ( controller_list[controller_idx].com & COM_I2C )
{
do_display_interface(controller_idx, display_idx, postfix, 6); /* SW I2C */
do_display_interface(controller_idx, display_idx, postfix, 7); /* HW I2C */
do_display_interface(controller_idx, display_idx, postfix, 10); /* 2nd HW I2C */
}
if ( controller_list[controller_idx].com & COM_ST7920SPI )
{
do_display_interface(controller_idx, display_idx, postfix, 8); /* ST7920 SW SPI */
do_display_interface(controller_idx, display_idx, postfix, 9); /* HW SPI */
do_display_interface(controller_idx, display_idx, postfix, 14); /* 2ND HW SPI */
}
if ( controller_list[controller_idx].com & COM_UART )
{
/* currently there is no Arduino C++ interface, instead the interface is created manually in the example */
}
if ( controller_list[controller_idx].com & COM_KS0108 )
{
do_display_interface(controller_idx, display_idx, postfix, 11); /* KS0108 6800 parallel mode */
}
if ( controller_list[controller_idx].com & COM_SED1520 )
{
do_display_interface(controller_idx, display_idx, postfix, 13);
}
}
void do_controller_buffer_code(int idx, const char *postfix, int buf_len, int rows)
{
int display_idx;
char s[1024];
//sprintf(s, "u8g2_m_%s_%d_%d_%s", strlowercase(controller_list[idx].name), controller_list[idx].tile_width, controller_list[idx].tile_height, postfix);
/* this should fix #370, additionally the controller is removed (hope that this will not break anything) */
sprintf(s, "u8g2_m_%d_%d_%s", controller_list[idx].tile_width, controller_list[idx].tile_height, postfix);
if ( str_exists(s) == 0 )
{
str_add(s);
//FILE *fp = stdout;
fprintf(buf_code_fp, "uint8_t *%s(uint8_t *page_cnt)\n", s);
fprintf(buf_code_fp, "{\n");
fprintf(buf_code_fp, " static uint8_t buf[%d];\n", buf_len);
fprintf(buf_code_fp, " *page_cnt = %d;\n", rows);
fprintf(buf_code_fp, " return buf;\n");
fprintf(buf_code_fp, "}\n");
fprintf(buf_header_fp, "uint8_t *%s(uint8_t *page_cnt);\n", s);
}
display_idx = 0;
fprintf(setup_code_fp, "/* %s %s */\n", controller_list[idx].name, postfix);
while( controller_list[idx].display_list[display_idx].name != NULL )
{
do_display(idx, display_idx, postfix);
display_idx++;
}
}
void do_controller_list(void)
{
int i;
for( i = 0; i < sizeof(controller_list)/sizeof(*controller_list); i++ )
{
printf("%s: ",controller_list[i].name);
fprintf(setup_code_fp, "/* %s */\n", controller_list[i].name);
do_controller_buffer_code(i, "1", controller_list[i].tile_width*8, 1);
do_controller_buffer_code(i, "2", controller_list[i].tile_width*8*2, 2);
do_controller_buffer_code(i, "f", controller_list[i].tile_width*8*controller_list[i].tile_height, controller_list[i].tile_height);
printf("\n");
}
}
int is_arduino_cpp = 1;
int is_u8g2 = 1;
FILE *md_fp;
void do_md_display(int controller_idx, int display_idx)
{
FILE *fp = md_fp;
/*
fprintf(fp, "%s:", controller_list[controller_idx].name);
fprintf(fp, "%s\n", controller_list[controller_idx].display_list[display_idx].name);
*/
if ( is_u8g2 )
{
fprintf(fp, "\n");
fprintf(fp, "## %s ", struppercase(controller_list[controller_idx].name));
fprintf(fp, "%s", struppercase(controller_list[controller_idx].display_list[display_idx].name));
fprintf(fp, "\n");
fprintf(fp, "| Controller \"%s\", ", controller_list[controller_idx].name);
fprintf(fp, "Display \"%s\" | ", controller_list[controller_idx].display_list[display_idx].name);
fprintf(fp, "Descirption |\n");
fprintf(fp, "|---|---|\n");
}
else
{
if ( is_u8g2 != 0 || strcmp(controller_list[controller_idx].ll_hvline, U8X8_HVLINE ) == 0 )
{
fprintf(fp, "\n");
fprintf(fp, "## %s ", struppercase(controller_list[controller_idx].name));
fprintf(fp, "%s", struppercase(controller_list[controller_idx].display_list[display_idx].name));
fprintf(fp, "\n");
fprintf(fp, "| Controller \"%s\", ", controller_list[controller_idx].name);
fprintf(fp, "Display \"%s\" |\n", controller_list[controller_idx].display_list[display_idx].name);
fprintf(fp, "|---|\n");
}
}
}
void do_md_display_interface_buffer(int controller_idx, int display_idx, int interface_idx, char *postfix, int size, int rows)
{
FILE *fp = md_fp;
/*
fprintf(fp, "%s:", controller_list[controller_idx].name);
fprintf(fp, "%s:", controller_list[controller_idx].display_list[display_idx].name);
fprintf(fp, "%s:", prefix);
fprintf(fp, "%s\n", interface_list[interface_idx].interface_name);
*/
if ( is_u8g2 )
{
if ( is_arduino_cpp )
{
fprintf(fp, "| U8G2_");
fprintf(fp, "%s_", struppercase(controller_list[controller_idx].name));
fprintf(fp, "%s_", struppercase(controller_list[controller_idx].display_list[display_idx].name));
fprintf(fp, "%s", struppercase(postfix));
if ( interface_list[interface_idx].interface_name[0] != '\0' )
fprintf(fp, "_%s", struppercase(interface_list[interface_idx].interface_name));
fprintf(fp, "(rotation, %s)", interface_list[interface_idx].pins_md_plain);
if ( postfix[0] == 'f' )
{
fprintf(fp, " | full framebuffer, size = %d bytes |\n", size);
}
else
{
fprintf(fp, " | page buffer, size = %d bytes |\n", size);
}
}
else
{
fprintf(fp, "| ");
/*
fprintf(fp, "u8g2_Setup_");
fprintf(fp, "%s_", strlowercase(controller_list[controller_idx].name));
fprintf(fp, "%s_", strlowercase(controller_list[controller_idx].display_list[display_idx].name));
fprintf(fp, "%s", strlowercase(postfix));
*/
fprintf(fp, "%s", get_setup_function_name(controller_idx, display_idx, postfix));
fprintf(fp, "(u8g2, ");
fprintf(fp, "rotation, ");
fprintf(fp, "%s, ", interface_list[interface_idx].generic_com_procedure);
fprintf(fp, "%s)", "uC specific");
if ( postfix[0] == 'f' )
{
fprintf(fp, " | full framebuffer, size = %d bytes |\n", size);
}
else
{
fprintf(fp, " | page buffer, size = %d bytes |\n", size);
}
}
}
}
void do_md_display_interface(int controller_idx, int display_idx, int interface_idx)
{
FILE *fp = md_fp;
if ( !is_u8g2 )
{
if ( strcmp(controller_list[controller_idx].ll_hvline, U8X8_HVLINE ) == 0 )
{
if ( is_arduino_cpp )
{
fprintf(fp, "| U8X8_");
fprintf(fp, "%s_", struppercase(controller_list[controller_idx].name));
fprintf(fp, "%s", struppercase(controller_list[controller_idx].display_list[display_idx].name));
if ( interface_list[interface_idx].interface_name[0] != '\0' )
fprintf(fp, "_%s", struppercase(interface_list[interface_idx].interface_name));
fprintf(fp, "(%s) |\n", interface_list[interface_idx].pins_md_plain);
}
else
{
fprintf(fp, "| u8x8_Setup(u8x8_d_");
fprintf(fp, "%s_", strlowercase(controller_list[controller_idx].name));
fprintf(fp, "%s, ", strlowercase(controller_list[controller_idx].display_list[display_idx].name));
fprintf(fp, "%s, ", strlowercase(controller_list[controller_idx].cad));
fprintf(fp, "%s, ", strlowercase(interface_list[interface_idx].generic_com_procedure));
fprintf(fp, "uC specific) |\n");
}
}
}
do_md_display_interface_buffer(controller_idx, display_idx, interface_idx, "1", controller_list[controller_idx].tile_width*8, 1);
do_md_display_interface_buffer(controller_idx, display_idx, interface_idx, "2", controller_list[controller_idx].tile_width*8*2, 2);
do_md_display_interface_buffer(controller_idx, display_idx, interface_idx, "f", controller_list[controller_idx].tile_width*8*controller_list[controller_idx].tile_height, controller_list[controller_idx].tile_height);
}
void do_md_controller_list(void)
{
int controller_idx, display_idx;
for( controller_idx = 0; controller_idx < sizeof(controller_list)/sizeof(*controller_list); controller_idx++ )
{
display_idx = 0;
while( controller_list[controller_idx].display_list[display_idx].name != NULL )
{
do_md_display(controller_idx, display_idx);
/* generate interfaces for this display */
if ( controller_list[controller_idx].com & COM_4WSPI )
{
do_md_display_interface(controller_idx, display_idx, 0); /* SW SPI */
if ( is_arduino_cpp )
{
do_md_display_interface(controller_idx, display_idx, 1); /* HW SPI */
do_md_display_interface(controller_idx, display_idx, 12); /* 2nd HW SPI */
}
}
if ( controller_list[controller_idx].com & COM_3WSPI )
{
do_md_display_interface(controller_idx, display_idx, 4); /* 3wire SW SPI */
//do_md_display_interface(controller_idx, display_idx, 5); /* 3wire HW SPI (not implemented) */
}
if ( controller_list[controller_idx].com & COM_6800 )
{
do_md_display_interface(controller_idx, display_idx, 2); /* 6800 mode */
}
if ( controller_list[controller_idx].com & COM_8080 )
{
do_md_display_interface(controller_idx, display_idx, 3); /* 8080 mode */
}
if ( controller_list[controller_idx].com & COM_I2C )
{
do_md_display_interface(controller_idx, display_idx, 6); /* SW I2C */
do_md_display_interface(controller_idx, display_idx, 7); /* HW I2C */
do_md_display_interface(controller_idx, display_idx, 10); /* 2nd HW I2C */
}
if ( controller_list[controller_idx].com & COM_ST7920SPI )
{
do_md_display_interface(controller_idx, display_idx, 8); /* ST7920 SW SPI */
do_md_display_interface(controller_idx, display_idx, 9); /* HW SPI (not yet implemented) */
do_md_display_interface(controller_idx, display_idx, 14); /* 2ND HW SPI */
}
if ( controller_list[controller_idx].com & COM_KS0108 )
{
do_md_display_interface(controller_idx, display_idx, 11); /* KS0108 */
}
if ( controller_list[controller_idx].com & COM_SED1520 )
{
do_md_display_interface(controller_idx, display_idx, 13); /* SED1520 */
}
display_idx++;
}
}
}
int main(void)
{
buf_code_fp = fopen("u8g2_d_memory.c", "w");
fprintf(buf_code_fp, "/* u8g2_d_memory.c */\n");
fprintf(buf_code_fp, "/* generated code, codebuild, u8g2 project */\n");
fprintf(buf_code_fp, "\n");
fprintf(buf_code_fp, "#include \"u8g2.h\"\n");
fprintf(buf_code_fp, "\n");
buf_header_fp = fopen("u8g2_memory.h", "w");
//fprintf(buf_header_fp, "/* start of generated code, codebuild, u8g2 project */\n");
setup_code_fp = fopen("u8g2_d_setup.c", "w");
fprintf(setup_code_fp, "/* u8g2_d_setup.c */\n");
fprintf(setup_code_fp, "/* generated code, codebuild, u8g2 project */\n");
fprintf(setup_code_fp, "\n");
fprintf(setup_code_fp, "#include \"u8g2.h\"\n");
fprintf(setup_code_fp, "\n");
setup_header_fp = fopen("u8g2_setup.h", "w");
//fprintf(setup_header_fp, "/* start of generated code, codebuild, u8g2 project */\n");
u8g2_cpp_header_fp = fopen("U8g2lib.h", "w");
fprintf(u8g2_cpp_header_fp, "/* generated code (codebuild), u8g2 project */\n");
u8x8_cpp_header_fp = fopen("U8x8lib.h", "w");
fprintf(u8x8_cpp_header_fp, "/* generated code (codebuild), u8g2 project */\n");
u8x8_setup_c_md_fp = fopen("u8x8setupc.md", "w");
u8x8_setup_cpp_md_fp = fopen("u8x8setupcpp.md", "w");
u8g2_setup_c_md_fp = fopen("u8g2setupc.md", "w");
u8g2_setup_cpp_md_fp = fopen("u8g2setupcpp.md", "w");
do_controller_list();
md_fp = u8g2_setup_cpp_md_fp;
is_arduino_cpp = 1;
is_u8g2 = 1;
do_md_controller_list();
md_fp = u8g2_setup_c_md_fp;
is_arduino_cpp = 0;
is_u8g2 = 1;
do_md_controller_list();
md_fp = u8x8_setup_cpp_md_fp;
is_arduino_cpp = 1;
is_u8g2 = 0;
do_md_controller_list();
md_fp = u8x8_setup_c_md_fp;
is_arduino_cpp = 0;
is_u8g2 = 0;
do_md_controller_list();
fprintf(buf_code_fp, "/* end of generated code */\n");
fclose(buf_code_fp);
//fprintf(buf_header_fp, "/* end of generated code */\n");
fclose(buf_header_fp);
fprintf(setup_code_fp, "/* end of generated code */\n");
fclose(setup_code_fp);
//fprintf(setup_header_fp, "/* end of generated code */\n");
fclose(setup_header_fp);
fclose(u8g2_cpp_header_fp);
fclose(u8x8_cpp_header_fp);
fclose(u8x8_setup_c_md_fp);
fclose(u8x8_setup_cpp_md_fp);
fclose(u8g2_setup_c_md_fp);
fclose(u8g2_setup_cpp_md_fp);
system("cp u8g2_d_memory.c ../../csrc/.");
puts("generate u8g2_d_memory.c");
system("cp u8g2_d_setup.c ../../csrc/.");
puts("generate u8g2_d_setup.c");
insert_into_file("../../csrc/u8g2.h", "u8g2_memory.h", "/* u8g2_d_memory.c generated code start */", "/* u8g2_d_memory.c generated code end */");
insert_into_file("../../csrc/u8g2.h", "u8g2_setup.h", "/* u8g2_d_setup.c generated code start */", "/* u8g2_d_setup.c generated code end */");
insert_into_file("../../cppsrc/U8g2lib.h", "U8g2lib.h", "/* Arduino constructor list start */", "/* Arduino constructor list end */");
insert_into_file("../../cppsrc/U8x8lib.h", "U8x8lib.h", "// constructor list start", "// constructor list end");
insert_into_file("../../../u8g2.wiki/u8g2setupc.md", "u8g2setupc.md", "# Setup Function Reference", "# Links");
insert_into_file("../../../u8g2.wiki/u8g2setupcpp.md", "u8g2setupcpp.md", "# Constructor Reference", "# Links");
insert_into_file("../../../u8g2.wiki/u8x8setupc.md", "u8x8setupc.md", "# Setup Function Reference", "# Links");
insert_into_file("../../../u8g2.wiki/u8x8setupcpp.md", "u8x8setupcpp.md", "# Constructor Reference", "# Links");
return 0;
}